Transmission Oil Lines - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hose assemblies (1) and hose assemblies (2).
Show/hide table
Illustration 2 g01735496 - Remove the cover from the transmission.
- Disconnect hose assemblies (1) and hose assemblies (2).
Show/hide table
| |
| Illustration 1 | g01735495 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Connect hose assemblies (2) and hose assemblies (1).
- Install the cover on the transmission.
Show/hide table
Illustration 4 g01735495 - Connect hose assemblies (2) and hose assemblies (1).
Show/hide table
| |
| Illustration 3 | g01735496 |
Caterpillar Information System:
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1230 - FMI 05
C18 Marine and Marine Generator Set Engines Heat Exchanger
G3500B Engines Air Lines
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1230 - FMI 03
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1229 - FMI 08
C13 and C15 On-Highway Engines Starting the Engine
C9 Marine Engines and C9 Marine Generator Sets Exhaust Elbow - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Does Not Crank
2008/11/24 New Films are Available for Certain Generator Sets {7405}
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1229 - FMI 02
2008/11/24 Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
C9 Marine Engines and C9 Marine Generator Sets Drive Coupling - Remove and Install
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1230 - FMI 06
120K and 120K Series 2 Motor Graders Machine Systems Blade Lift Cylinder - Remove and Install
793F CMD (Conversion) Off-Highway Truck Braking System MID 116 - CID 1232 - FMI 03
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1232 - FMI 05
793F CMD (Conversion) Off-Highway Truck Braking System MID 116 - CID 1232 - FMI 06
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1273 - FMI 02
2008/12/01 Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08 Storage Procedures Exist for Caterpillar Products {1000, 7000}
2008/12/01 New Pressure Relief Valve {1251, 1715}
C18 Industrial Engine Diagnostic Trouble Codes
C18 Industrial Engine Event Codes
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1326 - FMI 02