1988/02/22 Caterpillar

Product Support Literature Available For Electronic Modular Control Panels Used On SR4 Generators{0374,4450,7002}

Usage:

All Package Generator Sets

Reference: Service Magazines: July 6, 1987; Page 21; "New Electronic Modular Control Panel (SR4 Generator-Mounted)"; and July 20, 1987; Page 5, "Remanufactured Electronic Modular Control Panel Modules (EMCP) For Package Generator Sets".

In addition to the above Reference Articles, more product support information is now available for the 7C1000 Electronic Modular Control Panel. Also, to help lower repair costs, Remanufactured modules for the 7C1000 EMCP are available. Remanufactured parts still maintain high quality and reliability, yet cost about 45% of new.

Electronic modular control panel for package generator sets.

The following materials should supply you with the necessary product support information.

... Parts Book, SEBP1765, and the microfiche, SEFP1765.

... For programming and service information, Service Manual, Electronic Modular Control Panel (SR4 Generator-Mounted), SENR3535.

... For operation and maintenance information, refer to the Operation and Maintenance Guide for SR4 Generators and Control Panels, SEBU6150. This Guide completely covers the new Electric Power Generation product line, and replaces the former Guide, SEBU6051.

Caterpillar Information System:

1988/02/22 New 1U8271 Timing Advance Holding Tool Available{0766}

1988/02/22 Fluid Sampling Tools For Non-Pressurized Compartments{0786}

1988/02/22 Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}

1988/02/22 Correct Procedure To Weld Bucket Tip Adapters To Base Cutting Edge Of Bucket{6803}

1988/02/15 Servicing And Programming PEEC Truck Engines Equipped With Kysor® Shutdown System{1250}

1988/02/15 New Wear Sleeve Available For Alternator Drive Pulley{1400,1405}

1988/02/15 CXP Fluids Available From Caterpillar Inc.{0645,1318,1395,3000,4050}

1988/02/15 Hydraulic Test Bench Fittings Can Be Adapted To Quick Disconnect Fittings{0600,0784,5050}

1988/02/15 Assembly Of Face Seals And Connectors{0738,1250,4300,5050}

1988/02/08 New Transmission And Engine Oil Cooler Has Rubber End Sheets{1375,1378}

1988/02/01 New Shaft Used In Auxiliary Sea Water Pumps{1371,1389,1350}

1988/02/01 Replacement Gaskets Available For "V-E" Electrical Connectors{7553}

1988/02/22 Cold Weather Starting{1213,1250,1274,1450}

1988/02/22 New Crankshaft Assembly Used{1202}

1988/02/22 Replacing 6.25" Bore Marine Engines and 6.25" Bore Petroleum Engines With The 3500 Family Of Engines{1000}

1988/02/29 Oil Levels In Caterpillar Machines{7560}

1988/02/29 I.S.O. (International Standards Organization) Graphic Symbols Used On Hydraulic Schematics{0113,0374,5050}

1988/02/29 List Of Engine Wall Charts Available{0374,0375,1000}

1988/02/29 Seal For Primary Fuel Filter Now Serviced{1260}

1988/03/07 New 8T9182 Air Conditioner Compressor Repair Tool Group Available{0600}

1988/03/07 New Ratchet-Type Tube Wrenches Available In Larger Sizes{0602}

1988/03/07 Replacement Bearing Available For 5P4800 Swaging Tool{0618}

1988/03/07 Drive Spider Can Be Removed Without Special Tooling{0723,3354}

1988/03/07 Updated 8C5919 3406B PEEC Service Program Module Available{0781,0782}