1988/02/29 Caterpillar

List Of Engine Wall Charts Available{0374,0375,1000}

Usage:

D379, D398, D399, 3300, 3400, 3500 Families Of Engines

SUPPLEMENT: 10/02/89

SERVICE MAGAZINES: ...FEBRUARY 29, 1988; PAGE 13; "List Of Engine Wall Charts Available" on D379, D398, D399, 3300, 3400, 3500 Families of Engines. ...JUNE 27, 1988; PAGE 3; "Charts and Decals Available for Lubrication and Maintenance Intervals." ...NOVEMBER 28, 1988; PAGE 5; "More Charts And Decals Available For Lubrication And Maintenance Intervals." ...MARCH 6, 1989; PAGE 6; "New Engine Wall Charts Give Maintenance Management Recommendations" for D379, D398, D399, 3114, 3116, 3208, 3300, 3400, 3500 Families of Industrial, Marine and Generator Set Engines.

Disregard these articles and make reference to the new article "Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals" in this issue.

--------------- END SUPPLEMENT ---------------

Wall charts for the above engines have been announced from time to time in Preview. This article includes a consolidated list of the charts that are currently available. Wall charts include a lubrication and maintenance chart, refill capacities, and location of service points. Coolant, fuel and lubricant specifications are also shown.

Caterpillar Information System:

1988/02/29 I.S.O. (International Standards Organization) Graphic Symbols Used On Hydraulic Schematics{0113,0374,5050}

1988/02/29 Oil Levels In Caterpillar Machines{7560}

1988/02/22 Replacing 6.25" Bore Marine Engines and 6.25" Bore Petroleum Engines With The 3500 Family Of Engines{1000}

1988/02/22 New Crankshaft Assembly Used{1202}

1988/02/22 Cold Weather Starting{1213,1250,1274,1450}

1988/02/22 Product Support Literature Available For Electronic Modular Control Panels Used On SR4 Generators{0374,4450,7002}

1988/02/22 New 1U8271 Timing Advance Holding Tool Available{0766}

1988/02/22 Fluid Sampling Tools For Non-Pressurized Compartments{0786}

1988/02/22 Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}

1988/02/22 Correct Procedure To Weld Bucket Tip Adapters To Base Cutting Edge Of Bucket{6803}

1988/02/15 Servicing And Programming PEEC Truck Engines Equipped With Kysor® Shutdown System{1250}

1988/02/15 New Wear Sleeve Available For Alternator Drive Pulley{1400,1405}

1988/02/29 Seal For Primary Fuel Filter Now Serviced{1260}

1988/03/07 New 8T9182 Air Conditioner Compressor Repair Tool Group Available{0600}

1988/03/07 New Ratchet-Type Tube Wrenches Available In Larger Sizes{0602}

1988/03/07 Replacement Bearing Available For 5P4800 Swaging Tool{0618}

1988/03/07 Drive Spider Can Be Removed Without Special Tooling{0723,3354}

1988/03/07 Updated 8C5919 3406B PEEC Service Program Module Available{0781,0782}

1988/03/07 Updated Executive Program Module Available For The 8T8697 Electronic Control Analyzer Programmer (ECAP){0781,0782,0600}

1988/03/07 Install New Temperature Regulators Every 7500 Hours Or After One Year{1318,1330,1350,1355}

1988/03/14 New 1U8761 Portable Hydraulic Tester Available{0784,0774,0770,0776}

1988/03/14 Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}

1988/03/14 Magnetic Switches (Starter Relays) Improved{1450}

1988/03/14 Use The Correct Oil In Spark-Ignited Engines{1300}