1988/02/29 Caterpillar


Seal For Primary Fuel Filter Now Serviced{1260}

Usage:


3600 Family Of Industrial Engines

Description of Change: A Caterpillar seal is available now to seal the surface between the housing and the cartridge cover on the 4W5421 Primary Fuel Filter Group. The seal is used to replace seals that are damaged when the elements are being serviced. Each filter group will require two seals.

Adaptable To: The 2H4145 Seal is adaptable to all 3600 Family of Industrial Engines and to any additional applications for the 4W5421 Filter Group.

Caterpillar Information System:

1988/02/29 List Of Engine Wall Charts Available{0374,0375,1000}
1988/02/29 I.S.O. (International Standards Organization) Graphic Symbols Used On Hydraulic Schematics{0113,0374,5050}
1988/02/29 Oil Levels In Caterpillar Machines{7560}
1988/02/22 Replacing 6.25" Bore Marine Engines and 6.25" Bore Petroleum Engines With The 3500 Family Of Engines{1000}
1988/02/22 New Crankshaft Assembly Used{1202}
1988/02/22 Cold Weather Starting{1213,1250,1274,1450}
1988/02/22 Product Support Literature Available For Electronic Modular Control Panels Used On SR4 Generators{0374,4450,7002}
1988/02/22 New 1U8271 Timing Advance Holding Tool Available{0766}
1988/02/22 Fluid Sampling Tools For Non-Pressurized Compartments{0786}
1988/02/22 Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22 Correct Procedure To Weld Bucket Tip Adapters To Base Cutting Edge Of Bucket{6803}
1988/02/15 Servicing And Programming PEEC Truck Engines Equipped With Kysor® Shutdown System{1250}
1988/03/07 New 8T9182 Air Conditioner Compressor Repair Tool Group Available{0600}
1988/03/07 New Ratchet-Type Tube Wrenches Available In Larger Sizes{0602}
1988/03/07 Replacement Bearing Available For 5P4800 Swaging Tool{0618}
1988/03/07 Drive Spider Can Be Removed Without Special Tooling{0723,3354}
1988/03/07 Updated 8C5919 3406B PEEC Service Program Module Available{0781,0782}
1988/03/07 Updated Executive Program Module Available For The 8T8697 Electronic Control Analyzer Programmer (ECAP){0781,0782,0600}
1988/03/07 Install New Temperature Regulators Every 7500 Hours Or After One Year{1318,1330,1350,1355}
1988/03/14 New 1U8761 Portable Hydraulic Tester Available{0784,0774,0770,0776}
1988/03/14 Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14 Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14 Use The Correct Oil In Spark-Ignited Engines{1300}
1988/03/14 New Auxiliary Water Pump Group Used{1371}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.