Fuel Filter Is Restricted
如果下列事件代码激活，采用此步骤。 有关事件代码和这些代码的默认触发点的信息，请参阅故障诊断与排除, "事件代码"。 必须进入 Caterpillar ET（Electronic Technician，电子技师）的监控系统才能查看此代码的当前触发点。
Show/hide table
| 事件代码 | ||
|---|---|---|
| 代码和描述 | 产生此代码的状况 | 系统响应 |
| E095（1）燃油滤清器阻塞警告 | 经过过滤的燃油压力与未经过滤的燃油压力之差大于触发点压力。 | 将会记录该代码。 |
可能原因
- 燃油滤清器滤芯
建议的措施
燃油滤清器滤芯
更换燃油滤清器滤芯。
Caterpillar Information System:
3500C Marine Auxiliary Engines Exhaust Temperature Is High
3500C Marine Auxiliary Engines Engine Top Speed Is Not Obtained
3500C Marine Auxiliary Engines Crankcase Pressure Is High
3500B and 3500C Marine Engines Water Temperature Regulator
3500C Marine Auxiliary Engines Coolant Temperature Is Low
3500C Marine Auxiliary Engines Coolant Temperature Is High
3408E and 3412E Engines for Caterpillar Built Machines Diagnostic Capabilities
3500C Marine Auxiliary Engines Oil Pressure Is Low
Procedure for Cleaning an Engine that is Saturated with Water{1000} Procedure for Cleaning an Engine that is Saturated with Water{1000}
345D, 349D and 349D2 Excavators Hydraulic System Check Valve (Load)
C32 Marine Engine Overhaul (Top End) - Engines Which Are Rated "C" and Engines Which Are Rated "D"
TH48-E80 Oil/Gas Transmission Torque Converter - Assemble
3500C Marine Auxiliary Engines High Altitude Derate Occurrence
3500C Marine Auxiliary Engines Inlet Air Is Restricted
3512B Generator Set Engine Electronic Control Module (Engine) - Remove and Install - Secondary
3500C Marine Auxiliary Engines Event Codes
2008/07/14 New Piston Assemblies Are Used {1225}
2008/07/14 New Piston Assemblies Are Used {1225}
3500 Industrial Engines Crankshaft
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Crankshaft
3500C Marine Auxiliary Engines Diagnostic Trouble Codes
3412E and C30 Marine Engines System Pressure Release
C18 Marine Generator Set Engine Valve Lash - Inspect/Adjust
C18 Generator set and C18 Marine Engines Aftercooler - Remove