3500B and 3500C Marine Engines Caterpillar


Water Temperature Regulator

Usage:

3516B 9F2


图 1g03003458

表 1
技术规格 - 219-3240 温度调节器 
项目  数量  零件  技术规格说明 
完全开启温度时的最小开口距离为 10.4 mm (0.41 inch)。 
开启温度为 18 to 23 °C (64 to 73 °F)。 
完全开启温度为 33 °C (91 °F)。 

Caterpillar Information System:

3500C Marine Auxiliary Engines Coolant Temperature Is Low
3500C Marine Auxiliary Engines Coolant Temperature Is High
3408E and 3412E Engines for Caterpillar Built Machines Diagnostic Capabilities
3500C Marine Auxiliary Engines Oil Pressure Is Low
Procedure for Cleaning an Engine that is Saturated with Water{1000} Procedure for Cleaning an Engine that is Saturated with Water{1000}
345D, 349D and 349D2 Excavators Hydraulic System Check Valve (Load)
C32 Marine Engine Overhaul (Top End) - Engines Which Are Rated "C" and Engines Which Are Rated "D"
TH48-E80 Oil/Gas Transmission Torque Converter - Assemble
TH48-E80 Oil/Gas Transmission Torque Converter - Disassemble
2008/07/14 Support for Fuel Injection Pumps {1251}
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Auxiliary Hydraulic Lines - Boom
C27 and C32 Industrial and Petroleum Engines Air Inlet and Exhaust Lines
3500C Marine Auxiliary Engines Crankcase Pressure Is High
3500C Marine Auxiliary Engines Engine Top Speed Is Not Obtained
3500C Marine Auxiliary Engines Exhaust Temperature Is High
3500C Marine Auxiliary Engines Fuel Filter Is Restricted
3500C Marine Auxiliary Engines High Altitude Derate Occurrence
3500C Marine Auxiliary Engines Inlet Air Is Restricted
3512B Generator Set Engine Electronic Control Module (Engine) - Remove and Install - Secondary
3500C Marine Auxiliary Engines Event Codes
2008/07/14 New Piston Assemblies Are Used {1225}
2008/07/14 New Piston Assemblies Are Used {1225}
3500 Industrial Engines Crankshaft
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Crankshaft
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.