Information Plate Installed On BrakeSaver Housing{1155}
Usage:
3406, 3408 Truck Engines Equipped with BrakeSavers
Description of Change: An information plate is now installed on the BrakeSaver housing on 3406 and 3408 Truck Engines so equipped. The plate is installed on the left side, near the bottom of the housing, and is used for identification of the BrakeSaver Group No., Change No., Sequence No. and Test Code. This information will be of assistance to the serviceman when service work must be done on the unit.
BrakeSaver information plate.
Adaptable To: The new information plate is not adaptable to earlier engines because the necessary information is not available for the plate.
Caterpillar Information System:
1978/06/05 Procedures And Cautions For Use Of A Flex-Hone On 3204 And 3208 Engines{1201}
1978/05/29 A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor{1059,1250,1289}
1978/05/29 5P9722 Driver Needed To Install New Seal Assembly In Water Pumps{0622,1361}
1978/05/29 Attachment Groups Put Corrosion Inhibitor Directly Into Cooling System{1350}
1978/05/22 New Governor Spring Gives Correct Balance Point Speed{1264}
1978/05/22 Modification Of Drive Adapter For Fuel Injection Test Bench{0650,1272}
1978/05/22 Optional Assembly Procedure For Sperry Vickers Pumps With New Type Cartridges{5055}
1978/05/22 Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates{0600,1100,1101,1201}
1978/05/22 New Gasket Installed Between Flywheel Housing And Cylinder Block{1157,1201}
1978/05/15 Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15 New Drive Belt Idler Pulleys Have Larger Bearings{1358,1359}
1978/05/15 Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/06/12 Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12 New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12 5P8626 Tool Bit Available To Machine The 5P6595 And 5P8607 Liner Seat Inserts{0664}
1978/06/12 Clip Added To Compressor Lines Group To Keep Oil Line Away From Exhaust Manifold{1307,1065}
1978/06/12 New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks{1205}
1978/06/19 New Information On Reusable Cylinder Liners{1216}
1978/06/19 Lubrication For A Rebuilt Engine{0374,1000}
1978/06/19 New, Stronger " Drive Ratchet Available{0610}
1978/06/19 5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed{0644,1100}
1978/06/19 Grind Material From Boss On Parts Service Cylinder Block To Give Clearance For Starting Motor Mounting Bolt{1201,1453}
1978/06/26 Mounting For Transmission/Torque Converter Oil Cooler Improved To Decrease Vibration{1375}
1978/06/26 Changes Made To Warning Plates, Decals And Service Literature For Caterpillar Machines{7405}