A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor{1059,1250,1289}
Usage:
3304 and 3306 Industrial Engines That Have a Woodward Governor with An Electric Motor
Description of Change: A new exhaust manifold and fuel pump heat shield is used on the above engines. The former manifold and fuel pump shield has been canceled because it does not give the necessary clearance for the new common fuel lines. The new shields are installed on engines which have the new common fuel lines and a turbocharger installed at the rear.
Adaptable As: Direct replacement as shown in the chart.
Caterpillar Information System:
1978/05/29 5P9722 Driver Needed To Install New Seal Assembly In Water Pumps{0622,1361}
1978/05/29 Attachment Groups Put Corrosion Inhibitor Directly Into Cooling System{1350}
1978/05/22 New Governor Spring Gives Correct Balance Point Speed{1264}
1978/05/22 Modification Of Drive Adapter For Fuel Injection Test Bench{0650,1272}
1978/05/22 Optional Assembly Procedure For Sperry Vickers Pumps With New Type Cartridges{5055}
1978/05/22 Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates{0600,1100,1101,1201}
1978/05/22 New Gasket Installed Between Flywheel Housing And Cylinder Block{1157,1201}
1978/05/15 Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15 New Drive Belt Idler Pulleys Have Larger Bearings{1358,1359}
1978/05/15 Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15 Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15 Parts Information For Vickers Pumps Which Have Steel Backed Bronze Plates Between Rotor And End Plates{5055}
1978/06/05 Procedures And Cautions For Use Of A Flex-Hone On 3204 And 3208 Engines{1201}
1978/06/05 Information Plate Installed On BrakeSaver Housing{1155}
1978/06/12 Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12 New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12 5P8626 Tool Bit Available To Machine The 5P6595 And 5P8607 Liner Seat Inserts{0664}
1978/06/12 Clip Added To Compressor Lines Group To Keep Oil Line Away From Exhaust Manifold{1307,1065}
1978/06/12 New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks{1205}
1978/06/19 New Information On Reusable Cylinder Liners{1216}
1978/06/19 Lubrication For A Rebuilt Engine{0374,1000}
1978/06/19 New, Stronger " Drive Ratchet Available{0610}
1978/06/19 5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed{0644,1100}
1978/06/19 Grind Material From Boss On Parts Service Cylinder Block To Give Clearance For Starting Motor Mounting Bolt{1201,1453}