Pistons and Connecting Rods - Disassemble
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 4C-3601 | Piston Ring Expander | 1 |
B | 5P-8639 | Hydraulic Press | 1 |
8F-0024 | Hose As | 1 | |
1P-2375 | Quick Connect Coupler | 1 | |
1P-2376 | Quick Connect Coupler | 1 | |
5P-9725 | Hydraulic Cylinder Gp | 1 | |
5P-8651 | Spacer | 1 | |
5P-8649 | Adapter | 1 | |
5P-8650 | Bushing Adapter | 1 |
Start By:
- Remove the pistons and the connecting rods.
Note: Careful handling is required at all times. Fracture faces for both rod and cap should not be placed on any surface. Rod and cap should be laid flat on their sides where possible. Rod assembly should be kept bolted together to protect fracture surface when rod is out of engine.
Show/hide table
Illustration 1 | g06415850 |
Show/hide table
Illustration 2 | g06415855 |
Show/hide table
Illustration 3 | g06415860 |
Show/hide table
Illustration 4 | g06415900 |
Caterpillar Information System:
An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301} An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301}
340 Excavator Mirror
C13B Engines Pistons and Connecting Rods - Install
C13B Engines Pistons and Connecting Rods - Remove
395 Excavator Equipment Lowering with Engine Stopped
395 Excavator Engine and Machine Warm-Up
395 Excavator Fuel Tank Shutoff and Drain Control
Fenders May Crack on Certain Telehandlers {7252} Fenders May Crack on Certain Telehandlers {7252}
395 Excavator Mirror
MD6250 Rotary Drill Systems HVAC System
395 Excavator Fuel Transfer Pump (Refueling) - If Equipped
Quick Coupler Harness Receptacle May Pinned Wrong and Quick Coupler Switch May Malfunction on Certain 986K Wheel Loaders {1408} Quick Coupler Harness Receptacle May Pinned Wrong and Quick Coupler Switch May Malfunction on Certain 986K Wheel Loaders {1408}
C13B Engines Pistons and Connecting Rods - Assemble
395 Excavator Stopping the Engine
Procedure to Rework 11m Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 11m Mast Encoder on Certain MD6250 Rotary Drills {1408}
Procedure to Rework 13.6 m (44.62 ft) Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 13.6 m (44.62 ft) Mast Encoder on Certain MD6250 Rotary Drills {1408}
Procedure to Rework 13.6 m (44.62 ft) Coalspur Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 13.6 m (44.62 ft) Coalspur Mast Encoder on Certain MD6250 Rotary Drills {1408}
Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562} Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562}
D11 Track-Type Tractor Systems Piston Pump (Hydraulic Fan)
D11 Track-Type Tractor Systems Cab Mounting
D11 Track-Type Tractor Systems Air Conditioner Lines
395 Excavator Counterweight Removal and Installation
340 Excavators Machine Systems Stick - Remove
D11 Track-Type Tractor Systems Counterweight Group