- Telehandler
- TH336 (S/N: TDE1-UP)
- TH336C (S/N: MJR1-UP)
- TH337 (S/N: TDF1-UP)
- TH337C (S/N: DJB1-UP)
- TH406 (S/N: TBX1-UP)
- TH406C (S/N: GAT1-UP)
- TH407 (S/N: TBY1-UP)
- TH407C (S/N: MLH1-UP)
- TH414 (S/N: TBZ1-UP)
- TH414C (S/N: KEK1-UP; LYN1-UP; RWW1-UP)
- TH417 (S/N: TBT1-UP)
- TH417C (S/N: RRJ1-UP; NMM1-UP; RRW1-UP)
- TH417D (S/N: MKY1-UP)
- TH514 (S/N: TBW1-UP)
- TH514C (S/N: KKW1-UP)
- TH336C (S/N: MJR1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Certain 326-3984 Fenders on Telehandlers may crack. Cracks begin at the bolt mounting holes and could cause the fender to become unsecured from the mounting bracket.
Solution
Illustration 1 | g06415698 |
Cracked fender |
Required Parts | ||
---|---|---|
Qty | Part Number | Part Name |
1 | Fender |
In the event of failure, provide the picture and additional information along with M0105609 and CPI 439432, machine S/N, origin of break, and part hours at failure to your dealer Technical Communicator (TC). Request the dealer TC to submit the information through CPI Feedback within the Service Information Management System (SIMSi).
Replace with the same part number. See Table 1 for the part number.