Pistons and Connecting Rods - Remove
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Start By:
- Remove the cylinder head.
- Remove the engine oil pan.
- Remove the piston cooling jets.
Show/hide table
| |
| Illustration 1 | g06415622 |
|
Place an identification mark on the connecting rod and connecting rod cap. The number should match the cylinder number. The bearing notch should be on the right side. | |
Show/hide table
| |
| Illustration 2 | g06415632 |
Note: Careful handling is required for fractured connecting rods. Fractured faces for the connecting rod and connecting rod cap should not be placed on any surface. The connecting rod and the connecting rod cap should be placed on the sides to prevent damage. When possible, the connecting rod and the connecting rod cap should be bolted together to prevent damage.
Caterpillar Information System:
395 Excavator Equipment Lowering with Engine Stopped
395 Excavator Engine and Machine Warm-Up
395 Excavator Fuel Tank Shutoff and Drain Control
Fenders May Crack on Certain Telehandlers {7252} Fenders May Crack on Certain Telehandlers {7252}
395 Excavator Mirror
MD6250 Rotary Drill Systems HVAC System
395 Excavator Fuel Transfer Pump (Refueling) - If Equipped
Quick Coupler Harness Receptacle May Pinned Wrong and Quick Coupler Switch May Malfunction on Certain 986K Wheel Loaders {1408} Quick Coupler Harness Receptacle May Pinned Wrong and Quick Coupler Switch May Malfunction on Certain 986K Wheel Loaders {1408}
D11 Track-Type Tractor Systems Antenna
Inspection of the Rear of the Engine on Certain C4.4 Machines {1201} Inspection of the Rear of the Engine on Certain C4.4 Machines {1201}
Certain Cat® Product Link A6 Platform Network Managers May Stop Reporting and Loses Communication {7606} Certain Cat® Product Link A6 Platform Network Managers May Stop Reporting and Loses Communication {7606}
D11 Track-Type Tractor Systems Cutting Edges and End Bits
C13B Engines Pistons and Connecting Rods - Install
340 Excavator Mirror
An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301} An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301}
C13B Engines Pistons and Connecting Rods - Disassemble
C13B Engines Pistons and Connecting Rods - Assemble
395 Excavator Stopping the Engine
Procedure to Rework 11m Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 11m Mast Encoder on Certain MD6250 Rotary Drills {1408}
Procedure to Rework 13.6 m (44.62 ft) Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 13.6 m (44.62 ft) Mast Encoder on Certain MD6250 Rotary Drills {1408}
Procedure to Rework 13.6 m (44.62 ft) Coalspur Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 13.6 m (44.62 ft) Coalspur Mast Encoder on Certain MD6250 Rotary Drills {1408}
Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562} Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562}
D11 Track-Type Tractor Systems Piston Pump (Hydraulic Fan)
D11 Track-Type Tractor Systems Cab Mounting