D11 Track-Type Tractor Systems Caterpillar

Piston Pump (Hydraulic Fan)

Usage:

D11T KSN

Show/hide table




Illustration 1	g06416016

Show/hide table

Table 1
Item	Qty	Part	Specification Description
1	4	8T-2922 Bolt	Torque to 12.0 ± 1.8 N·m (106.2 ± 15.9 lb in).
2	4	3E-8008 Bolt	Torque to 310 ± 31 N·m (229 ± 23 lb ft).

Show/hide table




Illustration 2	g06416021
511-8235 Pump Head Gp

Show/hide table

Table 2
Item	Qty	Part	Specification Description
3	1	491-9696 Pump Control Valve Gp	Torque to 35.0 ± 1.4 N·m (309.8 ± 12.4 lb in).

Show/hide table




Illustration 3	g06416026

Show/hide table

Table 3
Item	Qty	Part	Specification Description
4	Use 3.55 to 3.59 mm (0.140 to 0.141 inch) spacer in place of the spring set determine the shims that are required to obtain dimension (A) of 108.5 to 108.7 mm (4.27 to 4.28 inch). As required, use the following shims:
	1	142-9433 Shim	Thickness is 0.60 mm (0.024 inch).
	1	142-9432 Shim	Thickness is 0.80 mm (0.032 inch).
	1	142-9431 Shim	Thickness is 1.00 mm (0.039 inch).
	1	142-9430 Shim	Thickness is 1.20 mm (0.047 inch).

Caterpillar Information System:

Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562} Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562}

Procedure to Rework 13.6 m (44.62 ft) Coalspur Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 13.6 m (44.62 ft) Coalspur Mast Encoder on Certain MD6250 Rotary Drills {1408}

Procedure to Rework 13.6 m (44.62 ft) Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 13.6 m (44.62 ft) Mast Encoder on Certain MD6250 Rotary Drills {1408}

Procedure to Rework 11m Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 11m Mast Encoder on Certain MD6250 Rotary Drills {1408}

395 Excavator Stopping the Engine

C13B Engines Pistons and Connecting Rods - Assemble

C13B Engines Pistons and Connecting Rods - Disassemble

An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301} An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301}

340 Excavator Mirror

C13B Engines Pistons and Connecting Rods - Install

C13B Engines Pistons and Connecting Rods - Remove

395 Excavator Equipment Lowering with Engine Stopped

D11 Track-Type Tractor Systems Cab Mounting

D11 Track-Type Tractor Systems Air Conditioner Lines

395 Excavator Counterweight Removal and Installation

340 Excavators Machine Systems Stick - Remove

D11 Track-Type Tractor Systems Counterweight Group

340 Excavators Machine Systems Stick - Install

C13B Engines Connecting Rod Bearings - Remove

C13B Engines Connecting Rod Bearings - Install

New Cylinder Relief Valves on the Head End of Boom Cylinders and Arch Cylinders are Now Used on Certain 525D, 535D, 545D, 555D Wheel Skidders {5051, 5117} New Cylinder Relief Valves on the Head End of Boom Cylinders and Arch Cylinders are Now Used on Certain 525D, 535D, 545D, 555D Wheel Skidders {5051, 5117}

395 Excavator Access Door and Cover Locations

D11 Track-Type Tractor Regulatory Information (Japan)

C13B Engines Crankshaft Main Bearings - Remove