Turbocharger - Disassemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 9S-6363 | Turbocharger Fixture | 1 |
Start By:
- Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the turbocharger in Tooling (A). Mark the turbocharger housings for the proper alignment during assembly.
- Loosen clamp (2). Remove clamp (2) and compressor housing (1).
Show/hide table
Illustration 2 g00593906 - Loosen clamp (5) and remove cartridge assembly (3) from turbine housing (4).
Show/hide table
| |
| Illustration 1 | g00593902 |
Caterpillar Information System:
D8T Track-Type Tractor Electronic Control (Fan Hydraulic System)
Improved Discharge Hydraulic Hose Assembly Routing is Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057} Improved Discharge Hydraulic Hose Assembly Routing is Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057}
330 GC and 330 Excavator Access Door and Cover Locations
D8T Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
903D Compact Wheel Loader Access Doors and Covers
C175–16 Locomotive Engine Diesel Exhaust Fluid Quality - Test
C175–16 Locomotive Engine Measuring Exhaust Temperature
986K Wheel Loader Engine Supplement Fan Group (Includes Fan, Fan Shroud, and Hydraulic Fan Motor) - Remove and Install
Improved Return Hydraulic Hose Assembly Routing Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057} Improved Return Hydraulic Hose Assembly Routing Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057}
Generator Rotor Magnets Separate on Certain D7E Track Type Tractors {4450} Generator Rotor Magnets Separate on Certain D7E Track Type Tractors {4450}
903D Compact Wheel Loader Engine Air Filter Service Indicator - Inspect/Replace
903D Compact Wheel Loader Differential and Final Drive Oil Sample - Obtain
CG137-08 Engines Turbocharger - Assemble
Head Liner May Sag on Certain Compact Wheel Loaders {7329} Head Liner May Sag on Certain Compact Wheel Loaders {7329}
903D Compact Wheel Loader Engine Crankcase Breather - Replace - and PCV Valve Check
903D Compact Wheel Loader Engine Oil Level - Check
PL61 Pipelayer Systems System Pressure - Release
903D Compact Wheel Loader Fuel System Filter and Water Separator - Replace
988K XE Wheel Loader Connector Contact Description
903D Compact Wheel Loader Fuel System Water Separator - Drain
988K XE Wheel Loader Power Supply (Priming) - Test - 988 XE Wheel Loader
903D Compact Wheel Loader Fuel Tank Water and Sediment - Drain
Cat® Command for Dozing, Operator Station Emerging Symptom Information
C9.3B Engines Atmospheric Pressure Sensor