CG137-08 Engines Caterpillar


Turbocharger - Assemble

Usage:

CG137-08 ST8

Assembly Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
A  9S-6363  Turbocharger Fixture 
B  Loctite C5-A Copper Anti-Seize Lubricant 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00593906

  1. Position cartridge assembly (3) in turbine housing (4). Install clamp assembly (5).


    Illustration 2g00593902

  2. Install the turbine housing on Tooling (A). Install the cartridge assembly in position in the turbine housing. Ensure that the markings on the housings are in alignment with each other. Put Tooling (B) on the threads of the clamp (2) which holds the cartridge assembly to the compressor housing (1). Install the clamp (2) and tighten the bolt to a torque of 14 ± 2 N·m (10 ± 2 lb ft).

End By:

  1. Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".

Caterpillar Information System:

CG137-08 Engines Turbocharger - Disassemble
D8T Track-Type Tractor Electronic Control (Fan Hydraulic System)
Improved Discharge Hydraulic Hose Assembly Routing is Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057} Improved Discharge Hydraulic Hose Assembly Routing is Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057}
330 GC and 330 Excavator Access Door and Cover Locations
D8T Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
903D Compact Wheel Loader Access Doors and Covers
C175–16 Locomotive Engine Diesel Exhaust Fluid Quality - Test
C175–16 Locomotive Engine Measuring Exhaust Temperature
986K Wheel Loader Engine Supplement Fan Group (Includes Fan, Fan Shroud, and Hydraulic Fan Motor) - Remove and Install
Improved Return Hydraulic Hose Assembly Routing Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057} Improved Return Hydraulic Hose Assembly Routing Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057}
Generator Rotor Magnets Separate on Certain D7E Track Type Tractors {4450} Generator Rotor Magnets Separate on Certain D7E Track Type Tractors {4450}
903D Compact Wheel Loader Engine Air Filter Service Indicator - Inspect/Replace
Head Liner May Sag on Certain Compact Wheel Loaders {7329} Head Liner May Sag on Certain Compact Wheel Loaders {7329}
903D Compact Wheel Loader Engine Crankcase Breather - Replace - and PCV Valve Check
903D Compact Wheel Loader Engine Oil Level - Check
PL61 Pipelayer Systems System Pressure - Release
903D Compact Wheel Loader Fuel System Filter and Water Separator - Replace
988K XE Wheel Loader Connector Contact Description
903D Compact Wheel Loader Fuel System Water Separator - Drain
988K XE Wheel Loader Power Supply (Priming) - Test - 988 XE Wheel Loader
903D Compact Wheel Loader Fuel Tank Water and Sediment - Drain
Cat® Command for Dozing, Operator Station Emerging Symptom Information
C9.3B Engines Atmospheric Pressure Sensor
C9.3B Engines Inlet Manifold Air Pressure Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.