Differential and Final Drive Oil Sample - Obtain
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
- Operate the machine for a few minutes before you obtain the fluid sample. This will thoroughly mix the fluid for a more accurate sample.
Show/hide table
Illustration 1 g06308313 Filler Plug for the Front Differential Show/hide tableIllustration 2 g06308317 Filler Plug for the Rear Differential - Obtaining a sample will require a vacuum pump or an equivalent. Withdraw the oil through the filler opening.
Reference: For more information, refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" and Special Publication, PEHP6001, "How To Take A Good Oil Sample".
Caterpillar Information System:
903D Compact Wheel Loader Differential and Final Drive Oil Level - Check
D8T Track-Type Tractor Daily Inspection
D8T Track-Type Tractor Cooling Cores - Clean
Retrofit Procedure Now Used to Replace Scraper Engine Rotochamber {1265, 1276} Retrofit Procedure Now Used to Replace Scraper Engine Rotochamber {1265, 1276}
D8T Track-Type Tractor Capacities (Refill)
C7.1 Engines Sensor Signal (PWM) - Test
336 Excavator Machine Systems Final Drive - Remove and Install
D8T Track-Type Tractor Machine Systems Steering Sensor - Remove and Install
903D Compact Wheel Loader Differential and Final Drive Oil - Change
Improved Protective Packaging is Now Available for Certain C175 Crankshaft Counterweight Bolts {1202, 795C} Improved Protective Packaging is Now Available for Certain C175 Crankshaft Counterweight Bolts {1202, 795C}
Installation Procedure for Ship Loose Heat Shields on Certain 3516 Marine Engines {1073} Installation Procedure for Ship Loose Heat Shields on Certain 3516 Marine Engines {1073}
336 Excavator Machine Systems Hydraulic Track Adjusters - Disassemble
903D Compact Wheel Loader Engine Air Filter Service Indicator - Inspect/Replace
Generator Rotor Magnets Separate on Certain D7E Track Type Tractors {4450} Generator Rotor Magnets Separate on Certain D7E Track Type Tractors {4450}
Improved Return Hydraulic Hose Assembly Routing Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057} Improved Return Hydraulic Hose Assembly Routing Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057}
986K Wheel Loader Engine Supplement Fan Group (Includes Fan, Fan Shroud, and Hydraulic Fan Motor) - Remove and Install
C175–16 Locomotive Engine Measuring Exhaust Temperature
C175–16 Locomotive Engine Diesel Exhaust Fluid Quality - Test
903D Compact Wheel Loader Access Doors and Covers
D8T Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
330 GC and 330 Excavator Access Door and Cover Locations
Improved Discharge Hydraulic Hose Assembly Routing is Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057} Improved Discharge Hydraulic Hose Assembly Routing is Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {5057}
D8T Track-Type Tractor Electronic Control (Fan Hydraulic System)
CG137-08 Engines Turbocharger - Disassemble