Recoil Spring - Assemble
参考: 专门说明书, "目视维修步骤 - 颜色和符号" M0066576。
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 4C-9540 | 反冲弹簧台架 | 1 |
| B | 146-2457 | 液压电源总成 | 1 |
| 223-3506 | 液压油缸和管路总成 | 1 | |
| C | 8S-9971 | 齿座 | 1 |
| D | 5P-3931 | 防粘结剂 | - |
| E | - | Loctite 242 | - |
Show/hide table
 |
|
反冲弹簧组件的弹簧需要数吨的力才能压缩。 当螺母位于固定连杆末端时，请勿尝试压缩或释放弹簧的张力。 固定连杆或螺母上螺纹的损坏可造成组件带有弹力分离，从而导致人身伤亡。 |
Show/hide table
| |
| 图 1 | g06306429 |
Show/hide table
| |
| 图 2 | g06306430 |
Show/hide table
| |
| 图 3 | g06306431 |
Show/hide table
| |
| 图 4 | g06306432 |
Show/hide table
| |
| 图 5 | g06306433 |
Show/hide table
| 注意 |
|---|
|
请勿从反冲弹簧组件拆下起重机，直到装置水平、居中并且锁定到指定的工具中为止。 |
Show/hide table
| |
| 图 6 | g06306436 |
Show/hide table
|
|
组装期间，需要数吨的力才能压缩反冲弹簧。 请勿压缩弹簧组件，直到工具上的盖已关闭。 反冲弹簧在负载下可能会扭曲并脱离工具，从而导致人身伤亡。 |
Show/hide table
| |
| 图 7 | g06306438 |
Show/hide table
| |
| 图 8 | g06306444 |
Show/hide table
| |
| 图 9 | g06306449 |
Show/hide table
| |
| 图 10 | g06306467 |
Show/hide table
| |
| 图 11 | g06306450 |
结束:
- 安装前引导轮、反冲弹簧和液压履带调节器组件。
Caterpillar Information System:
903D Compact Wheel Loader Mirror - If Equipped
903D Compact Wheel Loader Seat
C175-16 and C175-20 Locomotive Engines Flexible Exhaust Pipe - Remove and Install
903D Compact Wheel Loader Cab Door
903D Compact Wheel Loader Machine Retrieval
Rework Procedure for the Logging Winch Upgrade on Certain Wheel Skidders {5057, 5163, 5179} Rework Procedure for the Logging Winch Upgrade on Certain Wheel Skidders {5057, 5163, 5179}
New Coil Is Now Available for Certain 988F Wheel Loaders {5051, 5057} New Coil Is Now Available for Certain 988F Wheel Loaders {5051, 5057}
903D Compact Wheel Loader Plate Locations and Film Locations
390F Excavator Machine System Air Conditioner Lines
Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104} Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
336 Excavator Machine Systems Pedal Control (Travel) - Remove and Install
Procedure to Install GRADE System Upgrade Components Supported by Software on Certain Next Gen Excavators {7220} Procedure to Install GRADE System Upgrade Components Supported by Software on Certain Next Gen Excavators {7220}
Cat® GRADE 3D System Setup for D6 Build 20A Track-Type Tractors {7220} Cat® GRADE 3D System Setup for D6 Build 20A Track-Type Tractors {7220}
New Piston Pumps with Splined Ball Guide are Now Used on Certain Wheel Loaders {5070} New Piston Pumps with Splined Ball Guide are Now Used on Certain Wheel Loaders {5070}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130} A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
336 Excavator Machine Systems Bucket Cylinder - Assemble
C32 Tier 4 Final Marine Engines Crankcase Breather - Remove and Install - Right-Hand Orientation
Installation of LRC XQ Engine Conversion Kit for Certain 994K Machine Engines {1000} Installation of LRC XQ Engine Conversion Kit for Certain 994K Machine Engines {1000}
New Serpentine Belt is Now Used On Certain C18 Engines {1207, 1358, 1397, 1405, 1802} New Serpentine Belt is Now Used On Certain C18 Engines {1207, 1358, 1397, 1405, 1802}
3516E Engines for 994K Wheel Loaders Fuel Pressure - Test
C175–16 Locomotive Engine Engine Governing - Adjust
903D Compact Wheel Loader Leaving the Machine
C175–16 Locomotive Engine Fuel Rail Pressure - Release