390F Excavator Machine System Caterpillar


Air Conditioner Lines

Usage:

390F FEH


Illustration 1g03503780

Table 1
Item  Qty  Part  Specification Description 
      Sharp corners at each cutting edge of the cable straps shall not be allowed. 
6V-7357 Bolt  Torque to 10 ± 2 N·m (88 ± 18 lb in)
5C-9553 Bolt  Torque to 6 ± 1 N·m (53 ± 9 lb in).
OR
Tighten the bolt until the zero gap is achieved. 


Illustration 2g03503781

Table 2
Item  Qty  Part  Specification Description 
8T-7547 Bolt  Torque to 22.5 ± 2.5 N·m (200.0 ± 22.0 lb in)
8T-4971 Bolt  Torque to 10 ± 2 N·m (88 ± 18 lb in)


Illustration 3g03503784

Table 3
Item  Qty  Part  Specification Description 
7X-2537 Bolt  Torque to 22.5 ± 2.5 N·m (200.0 ± 22.0 lb in)

Caterpillar Information System:

Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104} Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
336 Excavator Machine Systems Pedal Control (Travel) - Remove and Install
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Right Side
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Left Side
330 GC and 330 Excavator Diesel Exhaust Fluid - Fill
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Pump (Variable Pitch Fan) - Hydraulic Fan Lines
986K Wheel Loader Systems Trim
Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490} Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490}
986K Wheel Loader Systems Window Wiper and Washer
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
986K Wheel Loader Systems Fender - Front
903D Compact Wheel Loader Plate Locations and Film Locations
New Coil Is Now Available for Certain 988F Wheel Loaders {5051, 5057} New Coil Is Now Available for Certain 988F Wheel Loaders {5051, 5057}
Rework Procedure for the Logging Winch Upgrade on Certain Wheel Skidders {5057, 5163, 5179} Rework Procedure for the Logging Winch Upgrade on Certain Wheel Skidders {5057, 5163, 5179}
903D Compact Wheel Loader Machine Retrieval
903D Compact Wheel Loader Cab Door
C175-16 and C175-20 Locomotive Engines Flexible Exhaust Pipe - Remove and Install
903D Compact Wheel Loader Seat
903D Compact Wheel Loader Mirror - If Equipped
336 Excavator Machine Systems Recoil Spring - Assemble
Procedure to Install GRADE System Upgrade Components Supported by Software on Certain Next Gen Excavators {7220} Procedure to Install GRADE System Upgrade Components Supported by Software on Certain Next Gen Excavators {7220}
Cat® GRADE 3D System Setup for D6 Build 20A Track-Type Tractors {7220} Cat® GRADE 3D System Setup for D6 Build 20A Track-Type Tractors {7220}
New Piston Pumps with Splined Ball Guide are Now Used on Certain Wheel Loaders {5070} New Piston Pumps with Splined Ball Guide are Now Used on Certain Wheel Loaders {5070}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.