966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Tilt Cylinder

Usage:

972M XE AN3


Illustration 1g06321186

Table 1
Item  Qty  Part  Specification Description 
170-9847 Buffer Seal  Lubricate the sealing lip lightly with the fluid that is being sealed. 
216-0005 U-Cup Seal  Lubricate the sealing lip lightly with the fluid that is being sealed. 
165-9289 Lip Type Seal  Lubricate the sealing lip lightly with the fluid that is being sealed. 
Before assembly, apply Loctite Retaining Compound 638 to the wiper seal groove. 
114-0757 Bushing  Outside diameter before assembly is 105.148 ± 0.032 mm (4.1400 ± 0.0012 inch).
Thickness is 2.475 ± 0.025 mm (0.0974 ± 0.0010 inch)
7Y-4695 Locknut  Before assembly, lubricate the threads.
Torque to 8000 ± 800 N·m (5900 ± 590 lb ft)
D1  525-9059 Cylinder As  Bore is 189.90 ± 0.10 mm (7.476 ± 0.004 inch)
D2  355-1247 Rod As  Diameter is 99.930 ± 0.038 mm (3.9342 ± 0.0015 inch)
D3  352-2058 Head  Bore over two lands is 100.63 ± 0.03 mm (3.961 ± 0.001 inch)
9J-7100 Bushing  Bore before assembly is 89.25 ± 0.02 mm (3.514 ± 0.001 inch).
Installation depth is 9.5 ± 0.5 mm (0.37 ± 0.02 inch)
9J-7099 Bushing  Bore before assembly is 89.25 ± 0.02 mm (3.514 ± 0.001 inch).
Installation depth is 9.3 ± 0.5 mm (0.36 ± 0.02 inch)

Caterpillar Information System:

986K Wheel Loader Systems Fender - Front
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Electronic Clutch Pressure Control) - Test
C175-16 Locomotive Engine Dosing Signal - Test
CX48–P2560–3060 Petroleum Transmission Pressure for Transmission Lubrication - Test
CX48–P2560–3060 Petroleum Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
C175-16 Locomotive Engine Injector Solenoid - Test
C175-16 Locomotive Engine Manifold DEF Temperature Is Low
C175-16 Locomotive Engine Manifold DEF Temperature Is High
C175-16 Locomotive Engine Fuel Pressure Is Low
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
D8T Track-Type Tractor Machine Systems Quick-Drop Valve - Remove and Install
336 Excavator Machine Systems Recoil Spring - Disassemble
986K Wheel Loader Systems Window Wiper and Washer
Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490} Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490}
986K Wheel Loader Systems Trim
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Pump (Variable Pitch Fan) - Hydraulic Fan Lines
330 GC and 330 Excavator Diesel Exhaust Fluid - Fill
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Left Side
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Right Side
336 Excavator Machine Systems Pedal Control (Travel) - Remove and Install
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104} Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104}
390F Excavator Machine System Air Conditioner Lines
903D Compact Wheel Loader Plate Locations and Film Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.