Quick-Drop Valve - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439-3938 | Link Bracket | 1 |
Show/hide table
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Remove bolts (1).
- Remove bolts (2) and open cover assemblies (3).
Show/hide table
Illustration 2 g06316612 - Disconnect harness assembly (4).
Show/hide table
Illustration 3 g06305661 - Remove cover assembly (5).
Show/hide table
Illustration 4 g06305666 - Disconnect hose assemblies (7).
- Remove bolts (6).
Show/hide table
Illustration 5 g06305671 View from the bottom of the quick-drop valve - Disconnect hose assembly (8) and hose assemblies (9).
- Disconnect harness assembly (10) (not shown).
Show/hide table
Illustration 6 g06305672 - Attach Tooling (A) and a suitable lifting device to quick-drop valve (11). The weight of quick-drop valve (11) is approximately
25 kg (56 lb) . - Remove quick-drop valve (11).
Show/hide table
Illustration 1 | g06305652 |
- Install quick-drop valve (11) in the reverse order of removal.
Caterpillar Information System:
336 Excavator Machine Systems Recoil Spring - Disassemble
C175-16 Locomotive Engine Fuel Pressure Is High
C175-16 Locomotive Engine Engine Cranks but Does Not Start
CX48–P2560–3060 Petroleum Transmission Relief Valve (Transmission Hydraulic Control) - Test and Adjust
New Software Updates Are Now Used On Certain Tier 4 Final Machines {1920} New Software Updates Are Now Used On Certain Tier 4 Final Machines {1920}
CX48–P2560–3060 Petroleum Transmission Transmission Oil Supply
D8T Track-Type Tractor Machine Systems Refrigerant Dryer - Remove and Install
986K Wheel Loader Systems Cutting Edge
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold
903D Compact Wheel Loaders Machine Systems Creeper Control
903D Compact Wheel Loaders Machine Systems Counterweight
903D Compact Wheel Loaders Machine Systems Pilot Lines
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
C175-16 Locomotive Engine Fuel Pressure Is Low
C175-16 Locomotive Engine Manifold DEF Temperature Is High
C175-16 Locomotive Engine Manifold DEF Temperature Is Low
C175-16 Locomotive Engine Injector Solenoid - Test
CX48–P2560–3060 Petroleum Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
CX48–P2560–3060 Petroleum Transmission Pressure for Transmission Lubrication - Test
C175-16 Locomotive Engine Dosing Signal - Test
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Electronic Clutch Pressure Control) - Test
986K Wheel Loader Systems Fender - Front
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
986K Wheel Loader Systems Window Wiper and Washer