986K Wheel Loader Systems Caterpillar


Window Wiper and Washer

Usage:

986K MH8


Illustration 1g06306758

Table 1
Item  Qty  Part  Specification Description 
6V-8225 Nut  Torque to 14 ± 2 N·m (124 ± 18 lb in)
8T-5400 Connector  Torque to 0.35 ± 0.05 N·m (3.09 ± 0.44 lb in)
Nut  Final installation torque is 9 ± 1 N·m (80 ± 9 lb in)
189-8622 Window Wiper Motor Gp  Toque to 38 ± 2 N·m (28 ± 1 lb ft)


Illustration 2g06306763
Rear view

Table 2
Item  Qty  Part  Specification Description 
Use the following procedure to tighten the nuts of the window wiper arm group:
1. Tighten the nuts to a torque of 21 ± 1 N·m (186 ± 9 lb in).
2. After a minimum of 0.5 hours to a maximum of 4 hours, tighten the nuts again to a torque of 21 ± 1 N·m (186 ± 9 lb in).
3. Ensure that the minimum field torque for the nut is 12 N·m (106 lb in)
Torque to 5.5 ± 0.5 N·m (48.7 ± 4.4 lb in)


Illustration 3g06306770

Table 3
Item  Qty  Part  Specification Description 
6V-7419 Wiper Blade  Torque to 3 N·m (27 lb in)

Caterpillar Information System:

966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
986K Wheel Loader Systems Fender - Front
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Electronic Clutch Pressure Control) - Test
C175-16 Locomotive Engine Dosing Signal - Test
CX48–P2560–3060 Petroleum Transmission Pressure for Transmission Lubrication - Test
CX48–P2560–3060 Petroleum Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
C175-16 Locomotive Engine Injector Solenoid - Test
C175-16 Locomotive Engine Manifold DEF Temperature Is Low
C175-16 Locomotive Engine Manifold DEF Temperature Is High
C175-16 Locomotive Engine Fuel Pressure Is Low
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
D8T Track-Type Tractor Machine Systems Quick-Drop Valve - Remove and Install
Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490} Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490}
986K Wheel Loader Systems Trim
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Pump (Variable Pitch Fan) - Hydraulic Fan Lines
330 GC and 330 Excavator Diesel Exhaust Fluid - Fill
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Left Side
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Right Side
336 Excavator Machine Systems Pedal Control (Travel) - Remove and Install
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104} Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104}
390F Excavator Machine System Air Conditioner Lines
903D Compact Wheel Loader Plate Locations and Film Locations
New Coil Is Now Available for Certain 988F Wheel Loaders {5051, 5057} New Coil Is Now Available for Certain 988F Wheel Loaders {5051, 5057}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.