Pressure for Transmission Lubrication - Test
The following test is used to test the oil pressure of the transmission lubrication.
Show/hide table
Illustration 1 | g01089423 |
Required tooling |
Show/hide table
Required Tools | ||||
---|---|---|---|---|
Tooling | Item | Part
Number |
Description | Qty |
A | A1 | 8T-0855 | Pressure Gauge | 1 |
A2 | 6V-3989 | Fitting | 1 | |
A3 | 6V-4143 | Quick Connect Coupler | 2 | |
A4 | 177-7861 | Hose As | 1 |
Show/hide table
Illustration 2 | g06305726 |
(1) Lubrication pressure tap |
The pressure for the transmission lubrication can be measured at pressure tap (1) on the front of the transmission.
- Install Tooling (A) on pressure tap (1).
- Start the engine.
- Increase the oil temperature to
47 °C (116 °F) . - Operate the engine at low idle. Observe the pressure gauge. The transmission lubrication pressure must be within the values that are shown in Specifications, Systems Operation, Testing and Adjusting, "Power Train Pressures".
- Operate the engine at high idle. Observe the pressure gauge. The torque converter outlet pressure must be within the values that are shown in Specifications, Systems Operation, Testing and Adjusting, "Power Train Pressures".
Shut off the engine.
Caterpillar Information System:
CX48–P2560–3060 Petroleum Transmission Relief Valve (Torque Converter Inlet) Pressure - Test
C175-16 Locomotive Engine Injector Solenoid - Test
C175-16 Locomotive Engine Manifold DEF Temperature Is Low
C175-16 Locomotive Engine Manifold DEF Temperature Is High
C175-16 Locomotive Engine Fuel Pressure Is Low
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Torque Converter Lockup Clutch) - Test
D8T Track-Type Tractor Machine Systems Quick-Drop Valve - Remove and Install
336 Excavator Machine Systems Recoil Spring - Disassemble
C175-16 Locomotive Engine Fuel Pressure Is High
C175-16 Locomotive Engine Engine Cranks but Does Not Start
CX48–P2560–3060 Petroleum Transmission Relief Valve (Transmission Hydraulic Control) - Test and Adjust
New Software Updates Are Now Used On Certain Tier 4 Final Machines {1920} New Software Updates Are Now Used On Certain Tier 4 Final Machines {1920}
C175-16 Locomotive Engine Dosing Signal - Test
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Electronic Clutch Pressure Control) - Test
986K Wheel Loader Systems Fender - Front
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
986K Wheel Loader Systems Window Wiper and Washer
Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490} Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490}
986K Wheel Loader Systems Trim
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Pump (Variable Pitch Fan) - Hydraulic Fan Lines
330 GC and 330 Excavator Diesel Exhaust Fluid - Fill
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Left Side
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Right Side
336 Excavator Machine Systems Pedal Control (Travel) - Remove and Install