966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Caterpillar


Tilt Cylinder

Usage:

966M XE B8P


Illustration 1g06306137

Table 1
Item  Qty  Part  Specification Description 
346-5193 Buffer Seal As  Lubricate the sealing lip lightly with the fluid that is being sealed. 
346-5201 U-Cup Seal  Lubricate the sealing lip lightly with the fluid that is being sealed. 
346-5199 Wiper Seal  Lubricate the sealing lip lightly with the fluid that is being sealed. 
Before assembly, apply Loctite Retaining Compound 638 to the wiper seal groove. 
2J-7686 Locknut  Before assembly, lubricate the threads.
Torque to 8000 ± 400 N·m (5900 ± 295 lb ft)
D1  525-9056 Cylinder As  Bore is 170.00 ± 0.05 mm (6.692 ± 0.002 inch)
D2  373-7112 Rod As  Diameter is 82.500 ± 0.038 mm (3.2480 ± 0.0015 inch)
D3  244-3602 Head  Bore over four lands is 82.83 ± 0.03 mm (3.261 ± 0.001 inch)
9X-8896 Bolt  Torque to 1050 ± 150 N·m (774 ± 111 lb ft)
9J-7100 Bushing  Bore before assembly is 89.25 ± 0.02 mm (3.514 ± 0.001 inch).
Installation depth is 9.5 ± 0.5 mm (0.37 ± 0.02 inch)
9J-7099 Bushing  Bore before assembly is 89.25 ± 0.02 mm (3.514 ± 0.001 inch).
Installation depth for 247-8492 Rod As is 9.6 ± 0.5 mm (0.38 ± 0.02 inch).
Installation depth for 373-7111 Rod As is 9.3 ± 0.5 mm (0.36 ± 0.02 inch)

Caterpillar Information System:

336 Excavator Machine Systems Pedal Control (Travel) - Remove and Install
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Right Side
336 Excavator Machine Systems Joystick Control and Mounting - Remove and Install - Left Side
330 GC and 330 Excavator Diesel Exhaust Fluid - Fill
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Pump (Variable Pitch Fan) - Hydraulic Fan Lines
986K Wheel Loader Systems Trim
Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490} Improved Information Display is Now Available for Certain Cat® Products {5258, 7450, 7451, 7490}
986K Wheel Loader Systems Window Wiper and Washer
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder
986K Wheel Loader Systems Fender - Front
CX48–P2560–3060 Petroleum Transmission Modulating Valve (Electronic Clutch Pressure Control) - Test
C175-16 Locomotive Engine Dosing Signal - Test
Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104} Improved Tilt Cylinder Hose Assembly Is Now Used on Certain 950K, 950M, 962K, and 962M Medium Wheel Loaders {5057, 5104}
390F Excavator Machine System Air Conditioner Lines
903D Compact Wheel Loader Plate Locations and Film Locations
New Coil Is Now Available for Certain 988F Wheel Loaders {5051, 5057} New Coil Is Now Available for Certain 988F Wheel Loaders {5051, 5057}
Rework Procedure for the Logging Winch Upgrade on Certain Wheel Skidders {5057, 5163, 5179} Rework Procedure for the Logging Winch Upgrade on Certain Wheel Skidders {5057, 5163, 5179}
903D Compact Wheel Loader Machine Retrieval
903D Compact Wheel Loader Cab Door
C175-16 and C175-20 Locomotive Engines Flexible Exhaust Pipe - Remove and Install
903D Compact Wheel Loader Seat
903D Compact Wheel Loader Mirror - If Equipped
336 Excavator Machine Systems Recoil Spring - Assemble
Procedure to Install GRADE System Upgrade Components Supported by Software on Certain Next Gen Excavators {7220} Procedure to Install GRADE System Upgrade Components Supported by Software on Certain Next Gen Excavators {7220}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.