New Serpentine Belt is Now Used On Certain C18 Engines {1207, 1358, 1397, 1405, 1802}
- Wheel Tractor-Scraper
- 631K (S/N: WT41-101; WT61-102; WTR1-121; WTW1-106)
- 637K (S/N: WTS1-127; WTT1-103; WTX1-1)
Description Of Change: The new serpentine belt allows for centering of the tensioner. Centering of the tensioner improves belt movement, helps prevent start up squealing, and premature belt failures.
Adaptable To:
Show/hide table
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
The new 339-5720 Serpentine Belt replaces the previous 392-6551 Serpentine Belt.
Caterpillar Information System:
Installation of LRC XQ Engine Conversion Kit for Certain 994K Machine Engines {1000} Installation of LRC XQ Engine Conversion Kit for Certain 994K Machine Engines {1000}
C32 Tier 4 Final Marine Engines Crankcase Breather - Remove and Install - Right-Hand Orientation
336 Excavator Machine Systems Bucket Cylinder - Assemble
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130} A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
New Piston Pumps with Splined Ball Guide are Now Used on Certain Wheel Loaders {5070} New Piston Pumps with Splined Ball Guide are Now Used on Certain Wheel Loaders {5070}
Cat® GRADE 3D System Setup for D6 Build 20A Track-Type Tractors {7220} Cat® GRADE 3D System Setup for D6 Build 20A Track-Type Tractors {7220}
Procedure to Install GRADE System Upgrade Components Supported by Software on Certain Next Gen Excavators {7220} Procedure to Install GRADE System Upgrade Components Supported by Software on Certain Next Gen Excavators {7220}
336 Excavator Machine Systems Recoil Spring - Assemble
903D Compact Wheel Loader Mirror - If Equipped
903D Compact Wheel Loader Seat
C175-16 and C175-20 Locomotive Engines Flexible Exhaust Pipe - Remove and Install
903D Compact Wheel Loader Cab Door
3516E Engines for 994K Wheel Loaders Fuel Pressure - Test
C175–16 Locomotive Engine Engine Governing - Adjust
903D Compact Wheel Loader Leaving the Machine
C175–16 Locomotive Engine Fuel Rail Pressure - Release
903D Compact Wheel Loader Engine Starting with Jump Start Cables
336 Excavator Machine Systems Bucket Cylinder - Disassemble
AD22 Underground Articulated Truck Hydraulic System Relief Valve (Ejector) - Test and Adjust - <B>Eject</B>
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Check Valve
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Air Precleaner - Cab
AD22 Underground Articulated Truck Hydraulic System Relief Valve (Ejector) - Test and Adjust - <B>Retract</B>
Rear Axle Housing May Crack on Certain 994H Large Wheel Loaders {0679, 3260, 3278} Rear Axle Housing May Crack on Certain 994H Large Wheel Loaders {0679, 3260, 3278}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Heater Lines