Coolant Contains Oil
- 机油冷却器
- 缸盖衬垫
- 缸盖
- 缸套
- 缸体
- 检查发动机机油冷却器是否泄漏。 如果发现渗漏,应安装新机油冷却器芯。 请参阅解体和组装手册。 检查从动设备油冷却器(如果配备)。
- 排空曲轴箱,使用清洁的发动机机油重新加注曲轴箱。 安装新发动机机油滤清器。 请参考操作和保养手册。
- 拆卸缸盖。 请参阅解体和组装手册。
- 检查缸套突出量。 请参考系统操作/测试和调整手册。
- 安装新缸盖衬垫,在隔板上安装新水封。 请参阅解体和组装手册。
检查缸盖有无裂纹。 如果发现裂纹,应修理和/或更换缸盖。 请参阅解体和组装手册。
检查缸套有无裂纹。 更换任何存在裂纹的缸套。 请参阅解体和组装手册。
检查缸体有无裂纹。 如果发现裂纹,应修理和/或更换缸体。
Caterpillar Information System:
C3.3 Industrial Engine Fuel System - Prime
Product Link PL321 De-registration{7606} Product Link PL321 De-registration{7606}
C18 Petroleum Generator Sets Model View Illustrations
C15 and C18 Petroleum Generator Sets Model View Illustrations
C-15, C-16, and C-18 Truck Engines Belt Tensioner
C27 and C32 Industrial and Petroleum Engines Vibration Damper and Pulley
3608 Engine Fuel Transfer Pump - Disassemble
C27 and C32 Industrial and Petroleum Engines Vibration Damper and Pulley
3608 Engine Prelubrication Oil Pump - Assemble
C27 and C32 Industrial and Petroleum Engines Exhaust Manifold
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490} Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
3176C, 3406E and 3456 Industrial Engines Configuration Parameters
3176C, 3406E and 3456 Industrial Engines Coolant Level Is Low
2008/01/21 Improved Canister for the Filter Housing {3004, 3067, 5068, 5091, 5092, 5093}
3176C, 3406E and 3456 Industrial Engines Coolant Temperature Is High
C15 and C18 Petroleum Engines Turbocharger Oil Lines
C15 and C18 Petroleum Engines Turbocharger Oil Lines
2007/11/01 Replacement of the Combustion Head for the Aftertreatment Regeneration Device in On-highway Engines {1088, 1720, 1722}
3608 Engine Valve Lifter - Assemble
C15 and C18 Petroleum Engines Turbocharger Oil Lines
Procedure to Relocate the Inlet Hose for the ARD Purge Air Pump{107P, 1803} Procedure to Relocate the Inlet Hose for the ARD Purge Air Pump{107P, 1803}
G3520C and G3520E Engines Turbocharger
Procedure for Using the Automatic Flash Update Tool for a UPS System{4480, 7620} Procedure for Using the Automatic Flash Update Tool for a UPS System{4480, 7620}
Manual Programming of a UPS System{4480, 7620} Manual Programming of a UPS System{4480, 7620}