Replacement of the Priming Pump {1258, 1263}
- Machine Engines:
- 3126B
- 3176C
- 3196
- 3406E
- 3408E
- All 3412
- 3456
- C-9
- C-12
- C-15
- C-16
- 3408 (S/N: 48W1-UP)
- C7 (S/N: C7C1-UP; KHX1-UP)
- C9 (S/N: THY1-UP)
- C9 (S/N: THX1-UP)
- C11 (S/N: RSX1-UP)
- C27 (S/N: EHX1-UP; LJX1-UP)
- C32 (S/N: LJW1-UP)
ReferenceSpecial Instruction, REHS2598, "Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly"
When troubleshooting issues with the electric priming pump refer to the Special Instruction that is listed above before replacing the pump.
A list of the affected part numbers is listed below. The first column in Table 1 lists the reference group part numbers for the applicable serial numbers. The third column in Table 1 lists the part numbers for the base assembly of the reference group.
Show/hide table
Part Numbers     | Description     | Part Numbers     | Description     |
212-3657     | Water Separator and Fuel Priming Pump Gp     | 217-8339     | Fuel Filter Base Assembly     |
190-8977     | Water Separator and Fuel Priming Pump Gp     | 190-8970     | Base As     |
217-6927     | Water Separator and Fuel Priming Pump Gp     | 217-7455     | Fuel Filter Base     |
252-1363     | Water Separator and Fuel Priming Pump Gp     | 247-6050     | Fuel Filter Base     |
213-4740     | Water Separator and Fuel Priming Pump Gp     | 247-6050     | Fuel Filter Base     |
217-8342     | Water Separator and Fuel Priming Pump Gp     | 217-8339     | Fuel Filter Base Assembly     |
235-8725     | Water Separator and Fuel Priming Pump Gp     | 235-8724     | Fuel Transfer Pump Base As     |
Caterpillar Information System:
3608 Engine Air Starting Motor - Install
3608 Engine Air Starting Motor - Assemble
3608 Engine Air Starting Motor - Disassemble
G3500 Generator Sets Battery or Battery Cable - Disconnect
3608 Engine Auxiliary Water Pump - Install
C15 and C18 Petroleum Engines Fuel Transfer Pump
3516C Generator Set Engine Configuration Parameters
3516B Engine for 994F and 994H Wheel Loaders Electrical Connectors
3608 Engine Water Pump - Assemble
3608 Engine Engine Oil Pump - Install
3608 Engine Engine Oil Pump - Assemble
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Component Location
3608 Engine Barring Group - Remove and Install
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133} Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
2008/04/14 A New Aftercooler is Now Used {1063}
Replace Exciter Rotor on LC6 Frame Generators{4457} Replace Exciter Rotor on LC6 Frame Generators{4457}
2007/10/22 Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22 Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263} Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Ether Starting Aid - Test
C15 and C18 Petroleum Generator Sets Safety Messages
C18 Petroleum Generator Sets Safety Messages
C27 and C32 Industrial and Petroleum Engines Turbocharger
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pilot Valve (Joystick)