Announcing a Serviceability Update for Track Roller Frames for Certain D8N and D8R Track-Type Tractors {4151}
- Track-Type Tractor
- D8N (S/N: 9TC1-UP; 1XJ1-UP; 5TJ1-UP; 7TK1-UP)
- D8R (S/N: 7XM1-UP; 9EM1-UP)
- D8R Series II (S/N: AKA1-UP; 6YZ1-UP)
- D8R (S/N: 7XM1-UP; 9EM1-UP)
Serviceability options of the track roller frame are revised on the machines listed above.
Show/hide table
Required Parts List | ||
---|---|---|
New Part Number | Description | Former Part Number |
310-2888 | Rear Frame As (RH) | 175-3632 |
310-2889 | Rear Frame As (LH) | 175-3633 |
310-2854 | Front Frame As | 171-8715 |
The 310-2889 Rear Frame As (LH) is a direct replacement for the 175-3633 Roller Frame. The new 310-2888 Rear Frame As (RH) is a direct replacement for the former 175-3632 Roller Frame.
The 310-2854 Front Frame As is a direct replacement for the 171-8715 Front Frame As. Note that the 171-8715 Front Frame As, and all of the recoil components in the assembly, must also be replaced by the 310-2854 Front Frame As. The 171-8715 Front Frame As is not compatible with the updated roller frames.
Note: Pivot shaft and e-bar dimensions have not changed, so the complete roller frames are a direct fit.
Show/hide table
Illustration 1 | g06137277 |
(A) Filler neck
(B) Lift link (C) Frame (D) Location of key |
Show/hide table
Illustration 2 | g06137280 |
(E) |
Identifying features of the updated roller frames:
- The filler neck (A) is a triangular shape with a three bolt pattern cover.
- The lift link (B) is positioned towards the rear of the front track roller frame.
- The new frame (C) has the four mounting posts for the carrier roller in the casting.
- The location of the keys (D) is now at the front of the lift link instead of the rear.
- The overall length of the tube measures
1506.0 mm (59.29 inch) from the forward end of the shaft to the center of the rear idler mount bore.
Caterpillar Information System:
New Clamshell Hood Bracket Is Now Used on Certain 980K, 980M, and 982M Wheel Loaders {7251} New Clamshell Hood Bracket Is Now Used on Certain 980K, 980M, and 982M Wheel Loaders {7251}
992K Wheel Loader Calibrations (Cat ET)
994K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B} M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
525D, 535D, 545D and 555D Wheel Skidders Solenoid Valve - Test
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Editing Truck and Material Lists
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Lubrication System
Installation Instructions For The New Solid-State Main Power Relay On Certain D6T Track-Type Tractors {1422, 1426} Installation Instructions For The New Solid-State Main Power Relay On Certain D6T Track-Type Tractors {1422, 1426}
A New Solid-State Main Power Relay Is Now Used on Certain D6T Track-Type Tractors {1422, 1426} A New Solid-State Main Power Relay Is Now Used on Certain D6T Track-Type Tractors {1422, 1426}
525D, 535D, 545D and 555D Wheel Skidders Operator Control Switch (Switch to Ground) - Test - Machines with Joystick Steering
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Simple Calibration
Steering Cylinder May Leak from the Rod Seals on Certain K and M Series Medium Wheel Loaders {4303} Steering Cylinder May Leak from the Rod Seals on Certain K and M Series Medium Wheel Loaders {4303}
992K Wheel Loader Calibration Error Codes
992K Wheel Loader Piston Pump (Implement) Main Relief Valve Pressure - Test and Adjust
992K Wheel Loader Position Sensor (Lift Linkage) - Replace
C175–16 Locomotive Engine Air in Fuel - Test
992K Wheel Loader Position Sensor (Tilt Linkage) - Replace
953K and 963K Track-Type Loaders Caterpillar Approved Work Tools
MD6310 Rotary Drill Belt - Inspect/Adjust/Replace
MD6200 Rotary Drill Cab Air Filter (Fresh Air) - Clean/Replace
992K Wheel Loader Pilot Control Actuator Pressure - Check
D6T Track-Type Tractor Electrohydraulic System Diagnostic Capabilities
312D2 and 313D2 Excavators Plate Locations and Film Locations
Improved Viscous Cab Mount Is Now Used on Certain 980M and 982M Medium Wheel Loaders {7301, 7301} Improved Viscous Cab Mount Is Now Used on Certain 980M and 982M Medium Wheel Loaders {7301, 7301}