MD6200 Rotary Drill Caterpillar


Cab Air Filter (Fresh Air) - Clean/Replace

Usage:

MD6200 D9A


ИЗВЕСТИЕ

Въздушен филтриращ елемент, задръстен с прах, води до влошена работа и експлоатационен живот на климатичната система или нагревателя на кабината.

За да се предотврати влошаване на работните характеристики, почиствайте редовно филтриращия елемент.




Илюстрация 1g06134101
Филтърът за свеж въздух за кабината е монтиран върху предната част на кабината.

  1. Отворете скобите и извадете капака на въздушния филтър.

  2. Потупайте въздушния филтър, за да отстраните замърсяванията. Не използвайте сгъстен въздух, за да почистите филтъра.

  3. След като почистите филтриращия елемент, проверете същия. Ако филтриращият елемент е повреден или силно замърсен, използвайте нов филтриращ елемент. Уверете се, че филтриращият елемент е сух.

  4. Поставете обратно капака на въздушния филтър.


ИЗВЕСТИЕ

Ако не монтирате елемента на филтъра за климатизиращата система, компонентите на системата ще се замърсят и повредят.


Caterpillar Information System:

MD6310 Rotary Drill Belt - Inspect/Adjust/Replace
953K and 963K Track-Type Loaders Caterpillar Approved Work Tools
992K Wheel Loader Position Sensor (Tilt Linkage) - Replace
C175–16 Locomotive Engine Air in Fuel - Test
992K Wheel Loader Position Sensor (Lift Linkage) - Replace
992K Wheel Loader Piston Pump (Implement) Main Relief Valve Pressure - Test and Adjust
992K Wheel Loader Calibration Error Codes
Announcing a Serviceability Update for Track Roller Frames for Certain D8N and D8R Track-Type Tractors {4151} Announcing a Serviceability Update for Track Roller Frames for Certain D8N and D8R Track-Type Tractors {4151}
New Clamshell Hood Bracket Is Now Used on Certain 980K, 980M, and 982M Wheel Loaders {7251} New Clamshell Hood Bracket Is Now Used on Certain 980K, 980M, and 982M Wheel Loaders {7251}
992K Wheel Loader Calibrations (Cat ET)
994K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B} M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
992K Wheel Loader Pilot Control Actuator Pressure - Check
D6T Track-Type Tractor Electrohydraulic System Diagnostic Capabilities
312D2 and 313D2 Excavators Plate Locations and Film Locations
Improved Viscous Cab Mount Is Now Used on Certain 980M and 982M Medium Wheel Loaders {7301, 7301} Improved Viscous Cab Mount Is Now Used on Certain 980M and 982M Medium Wheel Loaders {7301, 7301}
An Improved Latch Assembly in the Rear Guard Is Now Used on Certain D5R and D6N Track-Type Tractors {7187} An Improved Latch Assembly in the Rear Guard Is Now Used on Certain D5R and D6N Track-Type Tractors {7187}
New Secondary Steering Software Control Is Now Used on 980H Wheel Loaders {4300, 4324, 4800, 4808, 7610, 7620} New Secondary Steering Software Control Is Now Used on 980H Wheel Loaders {4300, 4324, 4800, 4808, 7610, 7620}
Installing The 523-4907 Work Tool Positioner Kit {5112, 5264, 5479} Installing The 523-4907 Work Tool Positioner Kit {5112, 5264, 5479}
Installing The 523-4908 Work Tool Positioner Kit {5112, 5264, 5479} Installing The 523-4908 Work Tool Positioner Kit {5112, 5264, 5479}
953K Track-Type Loader Machine Systems Fuel Tank - Remove and Install
MD6250 Rotary Drill Maintenance Interval Schedule
Improved Venturi Tubes Are Now Used on Certain C27 and C32 Machine Engines {1071} Improved Venturi Tubes Are Now Used on Certain C27 and C32 Machine Engines {1071}
953K Track-Type Loader Machine Systems Gear Pump (Fan Drive) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.