New Clamshell Hood Bracket Is Now Used on Certain 980K, 980M, and 982M Wheel Loaders {7251}
- Wheel Loader
- 980K (S/N: W7K1-2574; GTZ1-9002)
- 980M (S/N: KRS1-1955; N8T1-868)
- 982M (S/N: F9A1-408; K1Y1-1057)
- 980M (S/N: KRS1-1955; N8T1-868)
Description Of Change: New clamshell hood bracket is now used on the machines listed above. A field service bracket is designed and installed at hood strut base to improve clamshell clearance. The new bracket will provide increased strut extension to facilitate wider clamshell opening in order to clear the core for cleaning and maintenance purposes. The new clamshell hood bracket design will improve the reliability of hood bracket.
Adaptable To: The parts listed in Table 1 are adaptable to the products within the listed serial numbers, and are effective with all machines after the listed serial numbers.
Show/hide table
Required Parts | |||
---|---|---|---|
Item | Qty | Part Name | Description |
1 | 2 | 395-3252 | Strut |
2 | 2 | 514-9654 | Bracket As |
3 | 6 | 294-0533 | Pin |
4 | 6 | 5P-0372 | Lock Pin |
Show/hide table
Illustration 1 | g06137333 |
(1) (2) |
Show/hide table
Illustration 2 | g06137334 |
(1) (2) (3) (4) |
Caterpillar Information System:
992K Wheel Loader Calibrations (Cat ET)
994K Wheel Loader Machine Systems Lift Cylinder - Remove and Install
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B} M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
525D, 535D, 545D and 555D Wheel Skidders Solenoid Valve - Test
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Editing Truck and Material Lists
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Lubrication System
Installation Instructions For The New Solid-State Main Power Relay On Certain D6T Track-Type Tractors {1422, 1426} Installation Instructions For The New Solid-State Main Power Relay On Certain D6T Track-Type Tractors {1422, 1426}
A New Solid-State Main Power Relay Is Now Used on Certain D6T Track-Type Tractors {1422, 1426} A New Solid-State Main Power Relay Is Now Used on Certain D6T Track-Type Tractors {1422, 1426}
525D, 535D, 545D and 555D Wheel Skidders Operator Control Switch (Switch to Ground) - Test - Machines with Joystick Steering
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Simple Calibration
Steering Cylinder May Leak from the Rod Seals on Certain K and M Series Medium Wheel Loaders {4303} Steering Cylinder May Leak from the Rod Seals on Certain K and M Series Medium Wheel Loaders {4303}
980L Tier 3 Wheel Loader Machine System Combination Valve - Assemble - Brake Charge, Fan Supply, Implement
Announcing a Serviceability Update for Track Roller Frames for Certain D8N and D8R Track-Type Tractors {4151} Announcing a Serviceability Update for Track Roller Frames for Certain D8N and D8R Track-Type Tractors {4151}
992K Wheel Loader Calibration Error Codes
992K Wheel Loader Piston Pump (Implement) Main Relief Valve Pressure - Test and Adjust
992K Wheel Loader Position Sensor (Lift Linkage) - Replace
C175–16 Locomotive Engine Air in Fuel - Test
992K Wheel Loader Position Sensor (Tilt Linkage) - Replace
953K and 963K Track-Type Loaders Caterpillar Approved Work Tools
MD6310 Rotary Drill Belt - Inspect/Adjust/Replace
MD6200 Rotary Drill Cab Air Filter (Fresh Air) - Clean/Replace
992K Wheel Loader Pilot Control Actuator Pressure - Check
D6T Track-Type Tractor Electrohydraulic System Diagnostic Capabilities
312D2 and 313D2 Excavators Plate Locations and Film Locations