Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Caterpillar

Truck List

Adding a Truck to Truck List

1. Settings > Payload > List Management > Truck

2. Select the truck you would like to add a new truck above or below.
   Show/hide table

   Illustration 1	g06133953

   1. Press the "+" button.

3. Select if you want the new truck before or after the current truck.
   Show/hide table

   Illustration 2	g06127484

   1. Press the "Before" or "After" button.

4. Select buttons to edit each property of the new truck.
   Show/hide table

   Illustration 3	g06133915

   1. Enter the name that is desired to be shown on the display and stored.

   2. Enter the ID of the new truck.

   3. Enter the target weight of the new truck.

5. Select the "OK" button.
   Show/hide table

   Illustration 4	g06133985

6. Select the "Save" button to program the list to the ECM.

7. Select if you would like to save the changes or not.
   Show/hide table

   Illustration 5	g06133997

   1. Press "OK" to save the changes.

   2. Press "Back" to go back to the list.

Removing a Truck from Truck List

1. Settings > Payload > List Management > Truck
   Show/hide table

   Illustration 6	g06133953

2. Select the truck that you would like to remove.
   Show/hide table

   Illustration 7	g06133979

3. Press "Delete".

4. Press "OK" to delete the selected truck.

Material List

Adding a Material to Material List

1. Settings > Payload > List Management > Material
   Show/hide table

   Illustration 8	g06134110

2. Select the material that you would like to add a new material above or below.

   1. Press the "+" button.

3. Select if you want the new material before or after the current material.
   Show/hide table

   Illustration 9	g06127767

   1. Press "Before" or "After".

4. Select buttons to edit each property of the new material.
   Show/hide table

   Illustration 10	g06134020

   1. Enter the name that is desired to be shown on the display and stored.

   2. Enter the ID of the new material.

   3. Enter the density of the new material.

5. Select the "OK" button.
   Show/hide table

   Illustration 11	g06134144

6. Select the "Save" button to program the list to the ECM.

7. Select if you would like to save the changes or not.

   1. Press "OK" to save the changes.

   2. Press "Back" to go back to the list.

Removing a Material from Material List

1. Settings > Payload > List Management > Material
   Show/hide table

   Illustration 12	g06134110

2. Select the material that you would like to remove.
   Show/hide table

   Illustration 13	g06127777

3. Press "Delete".

4. Press "OK" to delete the selected material.