Improved Viscous Cab Mount Is Now Used on Certain 980M and 982M Medium Wheel Loaders {7301, 7301}
- Wheel Loader
- 980M (S/N: KRS1-2400; N8T1-610)
- 982M (S/N: F9A1-282; K1Y1-1500)
Description Of Change: An improved viscous cab mount is now used on machines listed above. The improved cab mount assemblies are designed to decrease vibration of the cab and provides improved ride over the previous standard mount.
Adaptable To:
Show/hide table
| Required Parts List | |||
|---|---|---|---|
| Item | Qty | Part Number | Description |
| 1 | 4 | Mount As | |
| 1 | 16 | Bolts | |
Show/hide table
| |
| Illustration 1 | g06139379 |
|
Right side view of cab | |
New 485-2984 Mount As (1) replaces the former 363-4466 Mount. If replacing the mounts, 16 8T-4186 Bolts should be replaced.
The parts listed in Table 1 are adaptable to machines within the listed serial number, and are effective with all machines after the listed serial numbers.
Caterpillar Information System:
312D2 and 313D2 Excavators Plate Locations and Film Locations
D6T Track-Type Tractor Electrohydraulic System Diagnostic Capabilities
992K Wheel Loader Pilot Control Actuator Pressure - Check
MD6200 Rotary Drill Cab Air Filter (Fresh Air) - Clean/Replace
MD6310 Rotary Drill Belt - Inspect/Adjust/Replace
953K and 963K Track-Type Loaders Caterpillar Approved Work Tools
992K Wheel Loader Position Sensor (Tilt Linkage) - Replace
C175–16 Locomotive Engine Air in Fuel - Test
992K Wheel Loader Position Sensor (Lift Linkage) - Replace
992K Wheel Loader Piston Pump (Implement) Main Relief Valve Pressure - Test and Adjust
992K Wheel Loader Calibration Error Codes
Announcing a Serviceability Update for Track Roller Frames for Certain D8N and D8R Track-Type Tractors {4151} Announcing a Serviceability Update for Track Roller Frames for Certain D8N and D8R Track-Type Tractors {4151}
An Improved Latch Assembly in the Rear Guard Is Now Used on Certain D5R and D6N Track-Type Tractors {7187} An Improved Latch Assembly in the Rear Guard Is Now Used on Certain D5R and D6N Track-Type Tractors {7187}
New Secondary Steering Software Control Is Now Used on 980H Wheel Loaders {4300, 4324, 4800, 4808, 7610, 7620} New Secondary Steering Software Control Is Now Used on 980H Wheel Loaders {4300, 4324, 4800, 4808, 7610, 7620}
Installing The 523-4907 Work Tool Positioner Kit {5112, 5264, 5479} Installing The 523-4907 Work Tool Positioner Kit {5112, 5264, 5479}
Installing The 523-4908 Work Tool Positioner Kit {5112, 5264, 5479} Installing The 523-4908 Work Tool Positioner Kit {5112, 5264, 5479}
953K Track-Type Loader Machine Systems Fuel Tank - Remove and Install
MD6250 Rotary Drill Maintenance Interval Schedule
Improved Venturi Tubes Are Now Used on Certain C27 and C32 Machine Engines {1071} Improved Venturi Tubes Are Now Used on Certain C27 and C32 Machine Engines {1071}
953K Track-Type Loader Machine Systems Gear Pump (Fan Drive) - Remove and Install
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553} Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
910M, 914M and 918M Wheel Loader Power Train Piston Motor (Hydrostatic) - Remove and Install
953K Track-Type Loader Machine Systems Piston Pump (Implement) - Remove and Install
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator