MID 134 - CID 3323 - FMI 11
Conditions Which Generate This Code:
This diagnostic code becomes active when the software detects that the left medium range object detection sensor with the incorrect internal resistance. The sensor has a software key that is sent to the display during start-up of the system.
System Response:
The object detection system is disabled. The status indicator for the system will illuminate red. The system will reactivate when the proper key is received from the object detection sensor.
Test Step 1. CHECK THE PART NUMBER OF THE SENSOR
- Check the part number of the sensor that was replaced.
Expected Result:
The sensor part number should be the same as the sensor that was replaced.
Results:
- YES - Possible internal sensor failure. Contact your Technical Communicator for a possible consultation with Caterpillar.
STOP
- NO - The sensor is a different part number.
Repair: Replace the sensor with the correct part number.
STOP
Caterpillar Information System:
D5R and D6N Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
C13 Engines for Caterpillar Built Machines Retarder - Test
Cat® Object Detection System MID 134 - CID 3323 - FMI 09
Cat® Object Detection System MID 134 - CID 3322 - FMI 12
Cat® Object Detection System MID 134 - CID 3322 - FMI 11
Cat® Object Detection System MID 134 - CID 3322 - FMI 09
Cat® Object Detection System MID 134 - CID 3319 - FMI 12
Cat® Object Detection System MID 134 - CID 3319 - FMI 11
Cat® Object Detection System MID 134 - CID 3319 - FMI 09
D11T Track-Type Tractors Repair Procedure for the Suction Tube for the Following 433-9240 Fuel Tank Gp, 372-3001 Fuel Tank Gp, 433-5916 Fuel Tank Gp, 335-5343 Fuel Tank Gp, 431-6687 Fue D11T Track-Type Tractors Repair Procedure for the Suction Tube for the Following 433-9240 Fuel Tank Gp, 372-3001 Fuel Tank Gp, 433-5916 Fuel Tank Gp, 335-5343 Fuel Tank Gp, 431-6687 Fue
Cat® Object Detection System MID 134 - CID 3318 - FMI 12
Cat® Object Detection System MID 134 - CID 3318 - FMI 11
C175-16 and C175-20 Locomotive Engines Pistons, Liners, and Connecting Rods - Remove
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Component Location
Transmission Assembly Instructions for the First and Third Shaft in the Transmission on Certain C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170} Transmission Assembly Instructions for the First and Third Shaft in the Transmission on Certain C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170}
A New First and Third Shaft in the Transmission is Now Available on all C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170} A New First and Third Shaft in the Transmission is Now Available on all C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170}
New Front Axle and Rear Axle Groups Are Now Used on Certain Compact Wheel Loaders and Integrated Toolcarriers {3278} New Front Axle and Rear Axle Groups Are Now Used on Certain Compact Wheel Loaders and Integrated Toolcarriers {3278}
Axle Pinion Seal Leaks on Certain Wheel Loaders {3260, 3278} Axle Pinion Seal Leaks on Certain Wheel Loaders {3260, 3278}
C175-16 and C175-20 Locomotive Engines Engine Oil Filter Housing - Remove
Cat® Object Detection System MID 134 - CID 3323 - FMI 12
New Implement Software Is Now Used on Certain 988K Large Wheel Loaders {7610, 7620} New Implement Software Is Now Used on Certain 988K Large Wheel Loaders {7610, 7620}
Cat® Product Link Firmware is Now Available for Certain K Series Wheel Loaders {7606} Cat® Product Link Firmware is Now Available for Certain K Series Wheel Loaders {7606}
C13 Engines for Caterpillar Built Machines Fuel Pressure Is High
340F Excavator Stopping the Engine