Cat® Object Detection System Caterpillar


MID 134 - CID 3322 - FMI 11

Usage:

854K 221
Conditions Which Generate This Code:

This diagnostic code becomes active when the software detects that the right medium range object detection sensor with the incorrect internal resistance. The sensor has a software key that is sent to the display during start-up of the system.

System Response:

The object detection system is disabled. The status indicator for the system will illuminate red. The system will reactivate when the proper key is received from the object detection sensor.

Test Step 1. CHECK THE PART NUMBER OF THE SENSOR

  1. Check the part number of the sensor that was replaced.

Expected Result:

The sensor part number should be the same as the sensor that was replaced.

Results:

  • YES - Possible internal sensor failure. Contact your Technical Communicator for a possible consultation with Caterpillar.

    STOP

  • NO - The sensor is a different part number.

    Repair: Replace the sensor with the correct part number.

    STOP

Caterpillar Information System:

Cat® Object Detection System MID 134 - CID 3322 - FMI 09
Cat® Object Detection System MID 134 - CID 3319 - FMI 12
Cat® Object Detection System MID 134 - CID 3319 - FMI 11
Cat® Object Detection System MID 134 - CID 3319 - FMI 09
D11T Track-Type Tractors Repair Procedure for the Suction Tube for the Following 433-9240 Fuel Tank Gp, 372-3001 Fuel Tank Gp, 433-5916 Fuel Tank Gp, 335-5343 Fuel Tank Gp, 431-6687 Fue D11T Track-Type Tractors Repair Procedure for the Suction Tube for the Following 433-9240 Fuel Tank Gp, 372-3001 Fuel Tank Gp, 433-5916 Fuel Tank Gp, 335-5343 Fuel Tank Gp, 431-6687 Fue
Cat® Object Detection System MID 134 - CID 3318 - FMI 12
Cat® Object Detection System MID 134 - CID 3318 - FMI 11
Cat® Object Detection System MID 134 - CID 3318 - FMI 09
Cat® Object Detection System MID 134 - CID 3317 - FMI 12
Cat® Object Detection System MID 134 - CID 3317 - FMI 09
C11, C13, C15, and C18 Industrial Engines Data Link - Test
Cat® Object Detection System MID 134 - CID 0248 - FMI 09
Cat® Object Detection System MID 134 - CID 3322 - FMI 12
Cat® Object Detection System MID 134 - CID 3323 - FMI 09
C13 Engines for Caterpillar Built Machines Retarder - Test
D5R and D6N Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
Cat® Object Detection System MID 134 - CID 3323 - FMI 11
C175-16 and C175-20 Locomotive Engines Pistons, Liners, and Connecting Rods - Remove
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Component Location
Transmission Assembly Instructions for the First and Third Shaft in the Transmission on Certain C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170} Transmission Assembly Instructions for the First and Third Shaft in the Transmission on Certain C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170}
A New First and Third Shaft in the Transmission is Now Available on all C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170} A New First and Third Shaft in the Transmission is Now Available on all C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170}
New Front Axle and Rear Axle Groups Are Now Used on Certain Compact Wheel Loaders and Integrated Toolcarriers {3278} New Front Axle and Rear Axle Groups Are Now Used on Certain Compact Wheel Loaders and Integrated Toolcarriers {3278}
Axle Pinion Seal Leaks on Certain Wheel Loaders {3260, 3278} Axle Pinion Seal Leaks on Certain Wheel Loaders {3260, 3278}
C175-16 and C175-20 Locomotive Engines Engine Oil Filter Housing - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.