Cat® Product Link Firmware is Now Available for Certain K Series Wheel Loaders {7606}
- Wheel Loader
- 924K (S/N: KW41-UP; ENC1-UP; HJF1-UP; PWR1-UP; SNZ1-UP)
- 930K (S/N: T681-UP; DYB1-UP; EYE1-UP; FRK1-UP; P3K1-UP; RHN1-UP)
- 938K (S/N: W8K1-UP; SWL1-UP; REP1-UP; XXT1-UP; HFW1-UP)
- 930K (S/N: T681-UP; DYB1-UP; EYE1-UP; FRK1-UP; P3K1-UP; RHN1-UP)
Reference: Special Instruction, REHS8850, "Installation Procedure for the Elite Product Link PLE601, PLE641, and PLE631 Systems".
Reference: Special Instruction, REHS9111, "Installation Procedure for the Pro Product Link PL641 and PL631 Systems".
Cat® Product Link Firmware 2016A is now available for certain K series wheel loaders. The Product Link firmware software is updated to eliminate false event code activation.
The new software part numbers are listed in Table 1.
Show/hide table
New Part Number | Former Part Number | Part Name | Description |
---|---|---|---|
Monitor Software Gp | PL641 2016A Radio Software | ||
Monitor Software Gp | PL601 2016A Network Manager Software |
Contact your Cat Technical Communicator (TC) to flash the Product Link firmware Over the Air to 2016A or later firmware or for further support.
Caterpillar Information System:
New Implement Software Is Now Used on Certain 988K Large Wheel Loaders {7610, 7620} New Implement Software Is Now Used on Certain 988K Large Wheel Loaders {7610, 7620}
Cat® Object Detection System MID 134 - CID 3323 - FMI 12
C175-16 and C175-20 Locomotive Engines Engine Oil Filter Housing - Remove
Axle Pinion Seal Leaks on Certain Wheel Loaders {3260, 3278} Axle Pinion Seal Leaks on Certain Wheel Loaders {3260, 3278}
New Front Axle and Rear Axle Groups Are Now Used on Certain Compact Wheel Loaders and Integrated Toolcarriers {3278} New Front Axle and Rear Axle Groups Are Now Used on Certain Compact Wheel Loaders and Integrated Toolcarriers {3278}
A New First and Third Shaft in the Transmission is Now Available on all C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170} A New First and Third Shaft in the Transmission is Now Available on all C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170}
Transmission Assembly Instructions for the First and Third Shaft in the Transmission on Certain C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170} Transmission Assembly Instructions for the First and Third Shaft in the Transmission on Certain C Series Wheel Skidders and 938H Wheel Loaders {0374, 0700, 3030, 3063, 3155, 3169, 3170}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Component Location
C175-16 and C175-20 Locomotive Engines Pistons, Liners, and Connecting Rods - Remove
Cat® Object Detection System MID 134 - CID 3323 - FMI 11
D5R and D6N Track-Type Tractor Machine Systems Ripper Lift Cylinder - Remove and Install
C13 Engines for Caterpillar Built Machines Retarder - Test
C13 Engines for Caterpillar Built Machines Fuel Pressure Is High
340F Excavator Stopping the Engine
988K XE Wheel Loader Fuses and Circuit Breakers - Replace/Reset
Cat® Object Detection System MID 134 - CID 3329 - FMI 03
Cat® Object Detection System MID 134 - CID 3329 - FMI 04
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Approved Machines
TRS10, TRS14, TRS18, and TRS23 Tilt-Rotator Lifting and Tying Down
Cat® Object Detection System MID 134 - CID 3330 - FMI 03
Cat® Object Detection System MID 134 - CID 3330 - FMI 04
Cat® Object Detection System MID 134 - CID 3331 - FMI 03
Procedure to Improve Machine Fuel Lines Routing on the D10T Track-Type Tractor {1261, 1274} Procedure to Improve Machine Fuel Lines Routing on the D10T Track-Type Tractor {1261, 1274}
Cat® Object Detection System MID 134 - CID 3331 - FMI 04