G3512 Generator Set Engines Caterpillar


Camshaft

Usage:

G3512 E26
该发动机有两个凸轮轴。 凸轮轴由发动机后部的齿轮驱动。


图 1g00807910
两段式凸轮轴的连接
(1) 定位销
(2) 隔套
(3) 螺栓

该发动机有两段式凸轮轴。 在凸轮轴一段内的定位销 (1) 通过垫片 (2) 进入凸轮轴的另一段。 这两段由螺栓 (3) 连接。

凸轮轴转动时,每个凸轮移动一个挺杆组件。 每个气缸有两个挺杆组件。 每个挺杆组件移动一根推杆和两个进气门或两个排气门。 凸轮轴必须与曲轴正时合拍。 凸轮轴凸轮与曲轴位置的关系使每一缸的气门能够在正确的时间工作。

Caterpillar Information System:

G3512 Generator Set Engines Crankshaft
G3500C and G3500E Generator Set Engines Aftercooler
G3500C and G3500E Generator Set Engines Ignition System
G3500C and G3500E Generator Set Engines Engine Sensors
G3500C and G3500E Generator Set Engines Electronic Control Module (ECM)
G3500C and G3500E Generator Set Engines Electronic Control System Operation
CX28 On-Highway Transmission Control Valve (Transmission Clutch Latching) - Install
G3500 A3 Engines Exhaust Bypass Valve - Adjust
2007/08/27 The Turbocharger Water Lines are Improved {1380}
CX28 On-Highway Transmission Control Valve (Transmission Clutch Latching) - Assemble
C7 Marine Engine Coolant Temperature Sensor
C7 Marine Engine Fuel Temperature Sensor - If Equipped
G3500C and G3500E Generator Set Engines Crankshaft Position for Valve Lash Setting
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073} Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
G3520C and G3520E Engines Temperature Sensor
3408C and 3412C Marine Engines Fuel Injection Lines
3408B and 3408C Industrial and Marine Engines Camshaft Bearings
Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp {191N} Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp {191N}
C32 Marine Auxiliary Engines Configuration Parameters
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold
14L Motor Grader Transmission - Assemble
G3500C and G3500E Generator Set Engines Integrated Temperature Sensing Module
C7 Marine Engine Alternator and Regulator
2007/08/01 Retirement of the Paper Version of Truck Engine News {1000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.