2007/08/27 Caterpillar


The Turbocharger Water Lines are Improved {1380}

Usage:

C32 RNC
Marine Engine:
C32 MARINE (S/N: RNC1-UP)

Description of Change:




Illustration 1g01405547

The hose must be retained at location (1) and location (2) .

An improved hose assembly is now used on the above listed engines.

Adaptable To: The 284-0612 Tube As is being replaced by the 312-5562 Hose As and two 184-7211 Clips. Also, two 0T-0573 Bolts are being replaced by two 0S-1619 Bolts. This change is effective with RNC02987.

Caterpillar Information System:

CX28 On-Highway Transmission Control Valve (Transmission Clutch Latching) - Assemble
C7 Marine Engine Coolant Temperature Sensor
C7 Marine Engine Fuel Temperature Sensor - If Equipped
CX28 On-Highway Transmission Control Valve (Transmission Clutch Latching) - Disassemble
C4.4 (Mech) Industrial Engine Water Temperature Regulator
G3500 A3 Engines Nitrogen Oxide Sensor
C15 On-Highway Engine Fuel Pressure Sensor - Remove and Install
C7 Marine Engine Coolant Level Sensor - If Equipped
C7 Petroleum Engine Fuel System - Prime
C7 Petroleum Engine Monitoring System - If Equipped
G3500 A3 Engines Nitrogen Oxide Level - Test
G3500 A3 Engines Nitrogen Oxide Sensor - Calibrate
G3500 A3 Engines Exhaust Bypass Valve - Adjust
CX28 On-Highway Transmission Control Valve (Transmission Clutch Latching) - Install
G3500C and G3500E Generator Set Engines Electronic Control System Operation
G3500C and G3500E Generator Set Engines Electronic Control Module (ECM)
G3500C and G3500E Generator Set Engines Engine Sensors
G3500C and G3500E Generator Set Engines Ignition System
G3500C and G3500E Generator Set Engines Aftercooler
G3512 Generator Set Engines Crankshaft
G3512 Generator Set Engines Camshaft
G3500C and G3500E Generator Set Engines Crankshaft Position for Valve Lash Setting
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073} Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
G3520C and G3520E Engines Temperature Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.