G3500C and G3500E Generator Set Engines Caterpillar


Aftercooler

Usage:

G3516C F6D



图 1g01393744

通过后冷器的空气/燃料混合气的流量

(1) 第一级

(2) 第二级

后冷器位于发动机的顶部。 后冷器有一个两级式芯组件。 水套水回路的冷却液流经后冷器芯的第一级 (1) 。 分开回路的冷却液流经后冷器芯的第二级 (2) 。

注: 对于某些热电联合发生的发动机来说,后冷器第一级可能也是单独的。

涡轮增压器压缩机的空气/燃料混合气通过节流阀流到后冷器盖。 空气/燃料混合气穿过后冷器芯片,以便与冷却液交换热量。 压缩的空气 / 燃油混合气温度在后冷器中会降低。 这样会增加空气 / 燃油混合气的密度。 从而使燃烧更有效。

空气/燃料混合气的温度在第一级开始降低。 第二级进一步降低空气/燃料混合气的温度。 后冷器的空气/燃料混合气通过空气进气歧管被分配到各气缸中供燃烧。

Caterpillar Information System:

G3500C and G3500E Generator Set Engines Ignition System
G3500C and G3500E Generator Set Engines Engine Sensors
G3500C and G3500E Generator Set Engines Electronic Control Module (ECM)
G3500C and G3500E Generator Set Engines Electronic Control System Operation
CX28 On-Highway Transmission Control Valve (Transmission Clutch Latching) - Install
G3500 A3 Engines Exhaust Bypass Valve - Adjust
2007/08/27 The Turbocharger Water Lines are Improved {1380}
CX28 On-Highway Transmission Control Valve (Transmission Clutch Latching) - Assemble
C7 Marine Engine Coolant Temperature Sensor
C7 Marine Engine Fuel Temperature Sensor - If Equipped
CX28 On-Highway Transmission Control Valve (Transmission Clutch Latching) - Disassemble
C4.4 (Mech) Industrial Engine Water Temperature Regulator
G3512 Generator Set Engines Crankshaft
G3512 Generator Set Engines Camshaft
G3500C and G3500E Generator Set Engines Crankshaft Position for Valve Lash Setting
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073} Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
G3520C and G3520E Engines Temperature Sensor
3408C and 3412C Marine Engines Fuel Injection Lines
3408B and 3408C Industrial and Marine Engines Camshaft Bearings
Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp {191N} Procedure for the Installation of the 304-4209 Nitrogen Oxide Sensor Gp {191N}
C32 Marine Auxiliary Engines Configuration Parameters
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold
14L Motor Grader Transmission - Assemble
G3500C and G3500E Generator Set Engines Integrated Temperature Sensing Module
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.