Oscillating Axle (Rear) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 6V-6146 | Load Leveler Gp | 1 |
B | 366-6003 | Handler As | 1 |
Start By:
- Remove the rear wheels.
- Remove the rear drive shaft.
- Drain the rear oscillating axle oil. Refer to Operation and Maintenance Manual, "Differential and Final Drive Oil - Change" for the correct draining and filling procedure.
Show/hide table
Illustration 1 g02862596 - Disconnect hose assembly (1).
Show/hide table
Illustration 2 g02862637 - Disconnect hose assembly (2).
Show/hide table
Illustration 3 g02862656 Show/hide tableIllustration 4 g02863116 Typical Example Show/hide tableIllustration 5 g02863257 - Attach Tooling (A) and a suitable lifting device to rear axle (3). The weight of rear axle (3) is approximately
750 kg (1650 lb) . - Remove bolts (4) from both sides of rear axle (3).
Show/hide table
Illustration 6 g02863297 Show/hide tableIllustration 7 g02863323 - Remove bolts (5) and lower the axle housing in order to gain access to hose assembly (6). Disconnect hose assembly (6).
Show/hide table
Illustration 8 g02863338 - Use Tooling (A) and the suitable lifting device in order to lower rear oscillating axle (3) onto Tooling (B). Remove the suitable lifting device from rear oscillating axle (3). Use Tooling (B) in order to remove rear oscillating axle (3) from under the machine.
- Install rear oscillating axle (3) in the reverse order of removal.
Caterpillar Information System:
2014/11/18 The Fuel Lines Group Has been Updated For The Fast Fill Option On Certain 627H and 627K Wheel Tractor-Scrapers {1274}
D6R2 Track-Type Tractor Engine Supplement Radiator Guard - Remove and Install
C175-16 Locomotive Engine Turbocharger Turbine Temperature Is High
926M, 930M and 938M Wheel Loaders Power Train Control Valve (Differential Lock) - Remove and Install
2015/01/29 New Motor Group is Now Used on Certain 963D Track-Type Loaders {5058}
D6R2 Track-Type Tractor Engine Supplement Belt Tightener - Remove and Install
2014/10/27 New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
926M, 930M and 938M Wheel Loaders Power Train Duo-Cone Conventional Seals
2014/10/27 An Improved Installation Procedure for the Injector Top O-Ring Seal on C27 and C32 Machine Engines {1251, 1254, 1290, 1713}
D7E Track-Type Tractor Systems Track Roller Frame
D7E Track-Type Tractor Systems Control Valve (Bulldozer Lift)
D7E Track-Type Tractor Systems Push Arm
2015/01/29 Improved Routing for the Nitrogen Oxide Sensor Assembly Is Now Used on Certain 621K, 623K, and 627K Wheel Tractor-Scrapers {1408}
3512E Tier 4 Final Engines for Land Electric Drilling Speed Control - Test
C27 and C32 Engines for Caterpillar Built Machines Electrical Power Supply - Test
D7E Track-Type Tractor Engine Supplement Valve Mechanism Cover - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines NOx Reduction System (NRS) - Test
D6R2 Track-Type Tractor Engine Supplement Radiator Core - Remove and Install
D7R Track-Type Bulldozer Hydraulic System Oil Filters - Replace
D6R2 Track-Type Tractor Engine Supplement Aftercooler - Remove and Install
D7R Track-Type Bulldozer Power Train System Oil Sample - Obtain
D7R Track-Type Bulldozer Power Train System Oil Level - Check
2014/11/03 Modification of Product Link Field Installation Kit Harness is Required to Match the Standard Machine Harness on Certain D3K, D4K, and D5K Small Track-Type Tractors {1408, 7606}
2014/10/23 Improved Final Drive Bearings Now Used on AD55, AD55B, and AD60 Underground Articulated Trucks {3278, 4001, 4008, 4051}