Fuel Transfer Pump - Remove and Install
Removal Procedure
- Turn the fuel supply to the "OFF" position.
- Disconnect tube assembly (3) and the fittings. Remove connector assembly (1) and fuel transfer pump (2) and the O-ring seal.
Show/hide table
Illustration 1 | g02845617 |
Installation Procedure
- Install fuel transfer pump (2) in the reverse order of removal.
Caterpillar Information System:
2013/06/10 Procedure to Rework the Alternator Guard Now Available for AD30 Underground Articulated Trucks {7174}
Procedure to Rework the Start Relay Magnetic Switch on Certain Underground Articulated Trucks {7499} Procedure to Rework the Start Relay Magnetic Switch on Certain Underground Articulated Trucks {7499}
924K, 930K and 938K Wheel Loaders Electronic Control Module (ECM)
924K, 930K and 938K Wheel Loaders Alternator
2013/07/18 Bolts Have Been Added to the Sweep Mount Bracket on Certain Wheel Skidders {7162}
2013/06/13 New Fenders with Improved Gussets Are Now Used on Certain Grapple Skidders {7252}
988K XE Wheel Loader Calibrations (Operator Monitor)
988K XE Wheel Loader Brake Accumulator
Caterpillar Wheel Loader and Wheel Dozer (834 - 854, 992 - 994) Technician Checklist Engine and Torque Converter (TC) Removal and Installation {0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101} Caterpillar Wheel Loader and Wheel Dozer (834 - 854, 992 - 994) Technician Checklist Engine and Torque Converter (TC) Removal and Installation {0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101}
854K Wheel Dozer and 992K Wheel Loader Machine Systems Ripper Control Valve - Remove and Install
D9T Track-Type Tractor Systems Hydraulic Fan Speed (On Demand) - Test and Adjust
988K XE Wheel Loader Electronic Control (Brake System)
C13 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Turbocharger - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Ignition Coil - Remove and Install
C13 Engine for Caterpillar Built Machines Combustion Head - Remove and Install
C13 Engine for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
C13 Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Water Pump - Remove and Install
C13 Engine for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
C13 Engine for Caterpillar Built Machines Flywheel - Remove and Install
C13 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install