Procedure to Rework the Alternator Guard Now Available for AD30 Underground Articulated Trucks {7174}
- Underground Articulated Truck:
- AD30 (S/N: CXR1-UP; DXR1-551)
Description of Change: A rework procedure for the 217-6714 Guard As is now available. The rework procedure provides an extended service life for the 217-6714 Guard As .
Adaptable To: The rework procedure is adaptable to the following machines.
Show/hide table
Machine     | Adaptable To     |
AD30     | (S/N: CXR1-UP; DXR1-551)     |
Procedure to Rework the Alternator Guard
- Remove sections (A) in order to conform with the inner profile of 217-6714 Guard As (1) .
Show/hide table
Illustration 2 | g03389302 |
(1) 217-6714 Guard As |
- Remove section (C) from 217-6714 Guard As (1) .
Show/hide table
Illustration 3 | g03389301 |
(1) 217-6714 Guard As (B) 6 mm (0.25 inch) |
- Ensure 217-6714 Guard As (1) has continuous weld both sides on all joints. Refer to Illustration 4 and Table 2.
Note: Ensure sufficient clearance for the bolt heads.
Show/hide tableTable 2 Item     Dimension     W1    
3 mm (0.10 inch) fillet weld    
Show/hide table
Illustration 4 | g03389816 |
(1) 217-6714 Guard As |
- Loosen five bolts (2) from the alternator guard mounting brackets.
Show/hide table
Illustration 5 | g03389831 |
(2) Bolt |
- Install 217-6714 Guard As (1), leaving the bolts loose.
Show/hide table
Illustration 6 | g03389832 |
Typical example (1) 217-6714 Guard As |
- Tighten the bolts from Step 5 and Step 6 evenly in order to reduce stress to 217-6714 Guard As (1) .
Caterpillar Information System:
Procedure to Rework the Start Relay Magnetic Switch on Certain Underground Articulated Trucks {7499} Procedure to Rework the Start Relay Magnetic Switch on Certain Underground Articulated Trucks {7499}
924K, 930K and 938K Wheel Loaders Electronic Control Module (ECM)
924K, 930K and 938K Wheel Loaders Alternator
2013/07/18 Bolts Have Been Added to the Sweep Mount Bracket on Certain Wheel Skidders {7162}
2013/06/13 New Fenders with Improved Gussets Are Now Used on Certain Grapple Skidders {7252}
988K XE Wheel Loader Calibrations (Operator Monitor)
988K XE Wheel Loader Brake Accumulator
Caterpillar Wheel Loader and Wheel Dozer (834 - 854, 992 - 994) Technician Checklist Engine and Torque Converter (TC) Removal and Installation {0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101} Caterpillar Wheel Loader and Wheel Dozer (834 - 854, 992 - 994) Technician Checklist Engine and Torque Converter (TC) Removal and Installation {0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101}
854K Wheel Dozer and 992K Wheel Loader Machine Systems Ripper Control Valve - Remove and Install
D9T Track-Type Tractor Systems Hydraulic Fan Speed (On Demand) - Test and Adjust
988K XE Wheel Loader Electronic Control (Brake System)
988K XE Wheel Loader Monitoring System (Brake Functions)
C13 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
C13 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Turbocharger - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Ignition Coil - Remove and Install
C13 Engine for Caterpillar Built Machines Combustion Head - Remove and Install
C13 Engine for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
C13 Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Water Pump - Remove and Install
C13 Engine for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
C13 Engine for Caterpillar Built Machines Flywheel - Remove and Install