Exhaust Cooler (NRS) - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 207-1600 (1)     | Rubber Lubricant     | 1     |
207-1601 | Rubber Lubricant     | 1     |
Show/hide table
( 1 ) | For Use In EAME |
Start By:
- Remove the exhaust elbow.
- Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
- Loosen clamp (1) .
Show/hide table
Illustration 1 | g02846078 |
- Loosen clamp assemblies (2) and remove bellows (3). Discard clamp assemblies (2) and bellows (3) .
- Remove elbow assemblies (4) and (6). Remove the O-ring seals.
- Remove bolts (5) .
- Remove nuts (7). Remove exhaust gas cooler (8) .
Show/hide table
Illustration 2 | g02169114 |
Installation Procedure
- Install exhaust gas cooler (8) in reverse order of removal.
- Apply Tooling (A) to the bores of elbow assemblies (4) and (6), and the O-ring seals.
- Install bellows (3) with the flow arrow pointing towards the exhaust cooler. Total misalignment of the bellows is 1.50 mm (0.060 inch) lateral and 1.50 mm (0.060 inch) axial.
- Tighten clamps (1) and (2) to a torque of 7.5 ± 1 N·m (66 ± 9 lb in).
Caterpillar Information System:
C13 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
2013/06/10 Procedure to Rework the Alternator Guard Now Available for AD30 Underground Articulated Trucks {7174}
Procedure to Rework the Start Relay Magnetic Switch on Certain Underground Articulated Trucks {7499} Procedure to Rework the Start Relay Magnetic Switch on Certain Underground Articulated Trucks {7499}
924K, 930K and 938K Wheel Loaders Electronic Control Module (ECM)
924K, 930K and 938K Wheel Loaders Alternator
2013/07/18 Bolts Have Been Added to the Sweep Mount Bracket on Certain Wheel Skidders {7162}
2013/06/13 New Fenders with Improved Gussets Are Now Used on Certain Grapple Skidders {7252}
988K XE Wheel Loader Calibrations (Operator Monitor)
988K XE Wheel Loader Brake Accumulator
Caterpillar Wheel Loader and Wheel Dozer (834 - 854, 992 - 994) Technician Checklist Engine and Torque Converter (TC) Removal and Installation {0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101} Caterpillar Wheel Loader and Wheel Dozer (834 - 854, 992 - 994) Technician Checklist Engine and Torque Converter (TC) Removal and Installation {0372, 0374, 1000, 1000, 1003, 1003, 3101, 3101}
854K Wheel Dozer and 992K Wheel Loader Machine Systems Ripper Control Valve - Remove and Install
C13 Engine for Caterpillar Built Machines Turbocharger - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Ignition Coil - Remove and Install
C13 Engine for Caterpillar Built Machines Combustion Head - Remove and Install
C13 Engine for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
C13 Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Water Pump - Remove and Install
C13 Engine for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
C13 Engine for Caterpillar Built Machines Flywheel - Remove and Install
C13 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install
C13 Engine for Caterpillar Built Machines Front Cover - Remove and Install
C13 Engine for Caterpillar Built Machines Camshaft Gear - Remove and Install