2006/12/18 Caterpillar


A New Air Lines Group is Used {1071}

Usage:

3512B PWG
Engine:
3512B (S/N: PWG1-UP)

Description of Change: A new air lines group is now used. The new air lines group has improved flexibility, and reduced vibration. The new air lines group can withstand higher temperatures.

Adaptable To: The 162-5718 Air Lines Gp is replaced by the new 281-0768 Air Lines Gp for the above 3512B Engine.

Note: The 162-5718 Air Lines Gp is not cancelled.The effectivity for the 281-0768 Air Lines Gp is PWG194-UP.




Illustration 1g01336572

281-0768 Air Lines Gp

(1) 282-3459 Air Tube

(2) 1A-2029 Bolt, and 5M-2894 Hard Washer

(3) 268-5659 Air Tube

(4) 268-5661 Adapter

(5) 0S-1591 Bolt, 2K-4973 Locknut, and 5M-2894 Hard Washer

(6) 273-1184 Bracket As

(7) 0T-0055 Bolt

(8) 7N-6986 Support

(9) 0S-1591 Bolt, 8M-9024 Hard Washer, and 9S-8752 Full Nut

Caterpillar Information System:

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562} The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
2007/04/09 An Improved Exhaust Manifold is Used {1059}
C175-16 and C175-20 Engines for Caterpillar Built Machines Front Drive Housing - Remove and Install
C11 and C13 Engines and 14M and 16M Motor Graders Oil Pressure Is Low
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Emissions Certification Film
G3516C, G3516E, and G3512E Generator Set Engines Engine Does Not Crank
TA19-M2WD and TA19-M4WD Agricultural Transmissions Location of Hydraulic Components for Transmission System
G3516C, G3516E, and G3512E Generator Set Engines Engine Cranks but Does Not Start
C13 and C15 On-highway Engines Electrical Connectors
2006/12/11 Use the Most Recent Parts for the Exhaust Manifold and for the Turbocharger {1052, 1053, 1059}
G3516C, G3516E, and G3512E Generator Set Engines Electrical Connectors
TH31 Well Servicing Transmissions Gear Pump (Transfer Gear Lubrication) - Assemble
C11, C13, and C15 On-highway Engines Fuel Related Components in Cold Weather
2007/01/01 New Software is Used {1902, 7620}
2006/11/20 Variable Gauge Undercarriage and the Determination of Caterpillar Warranty Eligibility {4150}
2006/11/20 A Newer Customer Communications Module (CCM) is Used {1926}
3500C Marine Propulsion Engines Sensor Supply - Test
3500C Marine Propulsion Engines Sensor Signal (PWM) - Test
2007/01/22 Improved Auxiliary Water Pumps are Used {1361, 1371}
3500C Marine Propulsion Engines Speed Control (Switch) - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Solenoid and Relief Valve (Output Transfer Gears) - Drop Box) (24 Volt
3500C Marine Propulsion Engines Starting - Test
TA22-4WD Agricultural Transmission Relief Valve (Transmission Hydraulic Control) - Test and Adjust
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Modulating Valve - 24 Volt
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.