Reclaimer Mixer
Show/hide table
Illustration 1 | g02824257 |
The CE plate is located on PIN plate (1) when required.
Depending on the year/model the PIN plate (1) is located on the middle of the frame on the left side, under the platform area. Or on the right side of the main frame near the pivot point between the front and rear frames.
Engine Serial Number plate (2) is located on the left side of the engine. Or on the right rear side of the engine cylinder block.
Caterpillar Information System:
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Assemble - C3.3B Tier 4 Interim/Stage 3A
C15 and C18 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install
Product Identification Numbers (PIN) Location Guide Cold Planer
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
2012/01/20 The Track Shoes for D7G and D7H Track-Type Tractors Have Been Updated to Classic Track Shoe Part Numbers {4170}
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
Product Identification Numbers (PIN) Location Guide Forest Machine
3500B Engines for Caterpillar Built Power Modules Cylinder Head
3500B and 3500C Marine Engines Fuel Injector
Bronze 379-8856 Engine Overhaul Kits for 3406 Machine Engines{1000} Bronze 379-8856 Engine Overhaul Kits for 3406 Machine Engines{1000}
D6N Track-Type Tractor Engine Supplement Temperature Sensor (DPF) - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Disassemble - C3.3B Tier 4 Interim/Stage 3A
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
924K, 930K and 938K Wheel Loaders Oil Pan
988K XE Wheel Loader Crankshaft Vibration Damper - Inspect
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Remove and Install - C3.3B Tier 4 Interim/Stage 3A
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
2012/02/17 Chassis Harness Improvements Are Now Used On 973D Track-Type Loaders With The Steel Mill Configuration {1408}
Product Identification Numbers (PIN) Location Guide Compactor (Asphalt)
Product Identification Numbers (PIN) Location Guide Compactor (Pneumatic)
D6N Track-Type Tractor Engine Supplement Water Pump (Engine) - Remove and Install
924K, 930K and 938K Wheel Loaders Electrohydraulic System Service Brake - Test
D6N Track-Type Tractor Engine Supplement Fuel Pressure Regulator - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature Is High