2012/01/20 Caterpillar


The Track Shoes for D7G and D7H Track-Type Tractors Have Been Updated to Classic Track Shoe Part Numbers {4170}

Usage:

D7H 2RG
Track-Type Tractor:
D7GSeries 2 (S/N: 35N1-UP; 64V1-UP; 65V1-UP; 91V1-UP; 92V1-UP; 44W1-UP; 45W1-UP; 72W1-UP)
D7HSeries II (S/N: 2SB1-UP; 4AB1-UP; 5WB1-UP; 5BF1-UP; 2RG1-UP; 3XG1-UP; 4FG1-UP; 79Z1-UP; 80Z1-UP; 82Z1-UP)
D7H (S/N: 77Z1-UP)
Service Magazine SEPD1385, 20 January 2012, "The Track Shoes for D7G and D7H Track-Type Tractors Have Been Updated to Classic Track Shoe Part Numbers". Disregard this article. See the replacement article that follows.

The D7G and D7H Hybrid track shoes have changed. This change applies only to Hybrid tracks that have 3/4 inch diameter track bolts.

Most hybrid shoes have been replaced by Classic Undercarriage shoes of the same width. Some Hybrid shoes have been canceled and replaced by a Classic shoe of slightly different width.

The former Hybrid Extreme Service (ES) shoes can be mixed with the Classic ES shoes in the same track. However, the former Hybrid Moderate Service (MS) shoes and the Classic MS shoes are not compatible in the same track. They will interfere with each other.

New Classic Undercarriage shoe part numbers are adaptable to the machines listed above.

Table 1
Regular Shoes    
Shoe Type     Old Part Number     New Classic Part Number     Old Width     New Width    
Extreme Service (ES)     5S-6909     188-5603    
510 mm (20 inch)    

560 mm (22 inch)    
5S-6910 188-5603    
560 mm (22 inch)    
No change    
5S-6911 188-5605    
610 mm (24 inch)    
No change    
169-0423 Canceled    
810 mm (32 inch)    
Canceled    
169-0425 Canceled    
810 mm (32 inch)    
Canceled    
Moderate Service (MS)     6P-3068     188-5333    
460 mm (18 inch)    

510 mm (20 inch)    
1P-9807 188-5333    
510 mm (20 inch)    
No change    
1P-9808 175-8802    
560 mm (22inch)    
No change    
1P-9809 175-8882    
610 mm (24 inch)    
No change    
1P-9810 188-5334    
660 mm (26 inch)    
No change    
2P-0854 188-5334    
710 mm (28 inch)    

660 mm (26 inch)    
8P-0430 376-1266    
865 mm (34 inch)    
No change    

Table 2
Master Shoes    
Shoe Type     Old Part Number     New Classic Part Number     Old Width     New Width    
Extreme Service (ES)     3P-0619     188-5604    
510 mm (20 inch)    

560 mm (22 inch)    
2P-9669 188-5604    
560 mm (22 inch)    
No change    
3P-0620 188-5606    
610 mm (24 inch)    
No change    
169-0422 Canceled    
810 mm (32 inch)    
Canceled    
169-0424 Canceled    
810 mm (32 inch)    
Canceled    
Moderate Service (MS)     6P-3069     188-5601    
460 mm (18 inch)    

510 mm (20 inch)    
3P-0615 188-5601    
510 mm (20 inch)    
No change    
3P-0616 175-8881    
560 mm (22inch)    
No change    
3P-0617 188-5246    
610 mm (24 inch)    
No change    
3P-0618 188-5602    
660 mm (26 inch)    
No change    
6P-2786 188-5602    
710 mm (28 inch)    

660 mm (26 inch)    
8P-0429 376-1268    
865 mm (34 inch)    
No change    

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
Product Identification Numbers (PIN) Location Guide Forest Machine
3500B Engines for Caterpillar Built Power Modules Cylinder Head
3500B and 3500C Marine Engines Fuel Injector
Bronze 379-8856 Engine Overhaul Kits for 3406 Machine Engines{1000} Bronze 379-8856 Engine Overhaul Kits for 3406 Machine Engines{1000}
D6N Track-Type Tractor Engine Supplement Temperature Sensor (DPF) - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Disassemble - C3.3B Tier 4 Interim/Stage 3A
924K, 930K and 938K Wheel Loaders C6.6 Engine Supplement Diesel Particulate Filter
924K, 930K and 938K Wheel Loaders C6.6 Engine Supplement Belt Tensioner
D6N Track-Type Tractor Engine Supplement Soot Sensor - Remove and Install
826K Landfill Compactor Cooling System Water Temperature Regulator - Replace
Product Identification Numbers (PIN) Location Guide Load, Haul, Dump
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
Product Identification Numbers (PIN) Location Guide Cold Planer
C15 and C18 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Assemble - C3.3B Tier 4 Interim/Stage 3A
Product Identification Numbers (PIN) Location Guide Reclaimer Mixer
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
924K, 930K and 938K Wheel Loaders Oil Pan
988K XE Wheel Loader Crankshaft Vibration Damper - Inspect
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Remove and Install - C3.3B Tier 4 Interim/Stage 3A
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
2012/02/17 Chassis Harness Improvements Are Now Used On 973D Track-Type Loaders With The Steel Mill Configuration {1408}
Product Identification Numbers (PIN) Location Guide Compactor (Asphalt)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.