Fuel Transfer Pump - Remove and Install
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 2P-8312 | 挡圈钳 | 1 |
| B | 8H-0663 | 轴承拉拔器总成 | 1 |
| C | 1P-0510 | 冲头总成 | 1 |
- 将燃油供应转到 “OFF” 位置，并将电源断路开关转到 OFF 位置。
Show/hide table
图 1 g02824056 - 断开软管组件 (1) 和 (2)。
- 卸下螺栓 (4)。
- 拆下燃油输油泵 (3) 和 O 形密封圈。
Show/hide table
图 2 g02155430 - 拆下螺母 (5)。 拆下螺栓 (7) 后拆下泵驱动装置 (6)。
Show/hide table
图 3 g02155446 - 拆下将转接接头 (14) 固定到轴承 (12) 上的螺栓 (10) 和护圈 (11)。
- 使用工具 (A) 以拆下挡圈 (13)。
- 使用工具 (C) 和适当的压具以将组装的轴承 (12) 和齿轮 (9) 从转接接头 (14) 上拆下。
- 使用工具 (B) 和适当的压具以将轴承 (8) 从齿轮 (9) 上拆下。
- 使用工具 (B) 和适当的压具以将轴承 (12) 从齿轮 (9) 上拆下。
- 按与拆卸相反的顺序安装输油泵 (3)。
Show/hide table
图 4 g02155446 - 加热轴承 (8) 后将轴承安装到齿轮 (9) 上。
- 加热轴承 (12) 后将轴承安装到齿轮 (9) 上。
- 使用工具 (C) 和适当的压具将组装完成的轴承 (8)、轴承 (12) 和齿轮 (9) 装入适配器 (14) 中。
- 将燃油供应转到 “ON” 位置，并将电源断路开关转到 ON 位置。
- 排出燃油系统中的空气。 请参阅测试和调整, "燃油系统 - 注油"。
Caterpillar Information System:
2012/01/20 The Track Shoes for D7G and D7H Track-Type Tractors Have Been Updated to Classic Track Shoe Part Numbers {4170}
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
Product Identification Numbers (PIN) Location Guide Forest Machine
3500B Engines for Caterpillar Built Power Modules Cylinder Head
3500B and 3500C Marine Engines Fuel Injector
Bronze 379-8856 Engine Overhaul Kits for 3406 Machine Engines{1000} Bronze 379-8856 Engine Overhaul Kits for 3406 Machine Engines{1000}
D6N Track-Type Tractor Engine Supplement Temperature Sensor (DPF) - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Disassemble - C3.3B Tier 4 Interim/Stage 3A
924K, 930K and 938K Wheel Loaders C6.6 Engine Supplement Diesel Particulate Filter
924K, 930K and 938K Wheel Loaders C6.6 Engine Supplement Belt Tensioner
D6N Track-Type Tractor Engine Supplement Soot Sensor - Remove and Install
826K Landfill Compactor Cooling System Water Temperature Regulator - Replace
Product Identification Numbers (PIN) Location Guide Cold Planer
C15 and C18 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Assemble - C3.3B Tier 4 Interim/Stage 3A
Product Identification Numbers (PIN) Location Guide Reclaimer Mixer
Product Identification Numbers (PIN) Location Guide Compactor (Soil)
924K, 930K and 938K Wheel Loaders Oil Pan
988K XE Wheel Loader Crankshaft Vibration Damper - Inspect
C2.6 and C3.3B Engines for Caterpillar Built Machines Exhaust Gas Recirculation Valve - Remove and Install - C3.3B Tier 4 Interim/Stage 3A
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
2012/02/17 Chassis Harness Improvements Are Now Used On 973D Track-Type Loaders With The Steel Mill Configuration {1408}
Product Identification Numbers (PIN) Location Guide Compactor (Asphalt)
Product Identification Numbers (PIN) Location Guide Compactor (Pneumatic)