- Track-Type Loader:
- 973D (S/N: LCP1-UP)
Description of Change: There have been improvements to the routing of the chassis harness on 973D Track-Type Loaders with the Steel Mill Configuration. The heat protection of the harness has also been improved by assembling the current heat protection around the harness.
Adaptable To: The change of the routing to 328-2745 Chassis Harness As is effective with the following machine: 973D (S/N: LCP195,203,219,234,236,238,242,244,249-UP).
The change to the routing of the 328-2745 Chassis Harness As is adaptable to the following machines using the rework procedure below: 973D (S/N: LCP103,105,110,114,118,130,135-136,140,142,145,148,161,164,166,172,174,176,178,180,184,189,199,211,215,222-223,225-226,228,230,232,240,246,248).
Required Parts
Required Parts     | |||
---|---|---|---|
Item     | Qty     | Part Number     | Description     |
1     | 2     | 256-1028     | Bracket As     |
2     | 12     | 311-8086     | Cable Strap     |
3     | 2     | 4P-7581     | Clip     |
4     | 2     | 8T-4121     | Hard Washer     |
5     | 2     | 8T-4137     | Bolt     |
Rework Procedure
- Open the bottom access panels in order to gain access to the chassis harness.
- Weld two brackets (1) as show in Illustration 2.
Illustration 1 | g02847836 |
Illustration 2 | g02847838 |
(A) 93 ± 1.5 mm (3.661 ± 0.059 inch) (B) 142.5 ± 2 mm (5.610 ± 0.079 inch) (C) 432.5 ± 2 mm (17.028 ± 0.079 inch) |
- Assemble ladder clips (3) to brackets (1) using a washer (4) and a bolt (5) for each ladder clip (3) .
Illustration 3 | g02847979 |
- Split the current heat protection located under the harness and install the heat protection all around the harness. Attach the heat protection with ten high temperature straps (2)
Illustration 4 | g02847857 |
- Move the harness on top of clips (3). Attach the harness to ladder clips (3) using straps (2) .
- Install the bottom access panels.