Belt Tensioner
Show/hide table
图 1 | g02547236 |
Show/hide table
222-2880 皮带张紧器 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
A     | -     | -     | 最小受限行程为 52 度。     |
1     | -     | -     | 距自由臂位置 35 度处,弹簧的装配扭矩为 59.9 ± 6.0 N·m (44.2 ± 4.4 lb ft)。     |
Caterpillar Information System:
3612 and 3616 Engines Manual Barring Group - Install
3612 and 3616 Engines Manual Barring Group - Remove
C32 Power Module Product Description
C27 and C32 Industrial Engines Electronic Unit Injector - Remove
C13 Engine Clean Gas Induction Pressure Sensor - Remove and Install
3606 and 3608 Engines Housing (Rear) - Install
C15 On-Highway Engine ARD Combustion Air Pressure Sensor - Remove and Install - Differential Pressure
C7 Engines for Caterpillar Built Machines Piston Cooling Jet
C7 Engines for Caterpillar Built Machines Piston Cooling Jet
390F Excavator Machine Systems Swing Drive - Assemble
3606 and 3608 Engines Housing (Rear) - Remove
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys DC Bus Voltage - Calibrate
C11 and C13 Engines and 14M and 16M Motor Graders Diagnostic Trouble Code List
C11 and C13 Engines and 14M and 16M Motor Graders Event Code List
C27 and C32 Industrial Engines Electronic Unit Injector - Install
C7 and C9 On-Highway Engines Retarder - Test
C15 Petroleum Generator Set Engines Coolant Temperature Sensor
C13 and C15 On-highway Engines Factory Passwords
C15 Petroleum Generator Set Engines Inlet Air Temperature Sensor
C-9 Engines for Caterpillar Built Machines Speed/Timing Sensor
C13 and C15 On-highway Engines Speed Control (Auxiliary) - Test
2006/08/01 New Fuel Requirements for 2007 Low Emission Engines {1000, 1250}
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Output Transfer Gear Group - Drop Box
C175-16 and C175-20 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install