Output Transfer Gear Group - Drop Box
Show/hide table
Illustration 1 | g01298492 |
(1) Lubricate the bore lightly with the lubricant that is being sealed.
(2) Apply 4C-5300 Gasket Sealant to the edge of the transfer gear case.
Note: Make a continuous bead along the edge of the transfer case. Remove excess or spilled sealant.
(3) Tighten the 176-0184 Drain Plug As to the following torque. ... 105 ± 10 N·m (77 ± 7 lb ft)
Caterpillar Information System:
2006/08/01 New Fuel Requirements for 2007 Low Emission Engines {1000, 1250}
C13 and C15 On-highway Engines Speed Control (Auxiliary) - Test
C-9 Engines for Caterpillar Built Machines Speed/Timing Sensor
C15 Petroleum Generator Set Engines Inlet Air Temperature Sensor
C13 and C15 On-highway Engines Factory Passwords
C15 Petroleum Generator Set Engines Coolant Temperature Sensor
C7 and C9 On-Highway Engines Retarder - Test
C27 and C32 Industrial Engines Electronic Unit Injector - Install
C11 and C13 Engines and 14M and 16M Motor Graders Event Code List
C11 and C13 Engines and 14M and 16M Motor Graders Diagnostic Trouble Code List
C11 and C13 Engines Belt Tensioner
3612 and 3616 Engines Manual Barring Group - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys AC Voltage - Calibrate
C175-16 and C175-20 Engines for Caterpillar Built Machines Inlet Valve Seals - Remove and Install
C280-12 and C280–16 Marine Engines Valve Lifter - Remove
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 2862 - FMI 03
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 2862 - FMI 05
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 2862 - FMI 06
C280-12 and C280–16 Marine Engines Valve Lifter - Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 2864 - FMI 03
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 2864 - FMI 05
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System MID 027 - CID 2864 - FMI 06
CX31 On-Highway Transmission Power Train Oil Filter and Base (Power Train) - Remove and Install