Transmission Oil Pump Pressure - Test - Rear Power Train
Show/hide table
Transmission Oil Pump Pressure | |||
---|---|---|---|
Date | Equipment ID Code | ||
Pressure Specification | Actual | ||
Low Idle | |
||
High Idle | Greater than |
This test will determine if the transmission oil pump is working correctly.
Show/hide table
Illustration 1 | g02571852 |
Tooling (A) 198-4240 Digital Pressure Indicator Gp |
Show/hide table
Tool | Item | Qty | Part No | Description |
---|---|---|---|---|
A | 198-4240 | Digital Pressure Indicator Gp | ||
A1 | 1 | 198-4234 | Digital Indicator | |
A2 | 1 | 198-4237 | Pressure Sensor Gp
(0 to 3,445 kPa (0 to 500 psi)) |
|
A3 | 1 | 198-4236 | Adapter Cable As |
- Connect Tool (A) to pressure tap (1).
- Activate the parking brake.
Show/hide table
Illustration 2 | g01033414 |
Right Side of the Scraper Engine (1) Pressure tap for the transmission oil pump at the transmission filter |
- Start the engines and run the engines at LOW IDLE rpm in the NEUTRAL position. The pressure on the digital pressure indicator must read
1270 ± 110 kPa (184 ± 16 psi) . - Slowly increase the scraper engine to HIGH IDLE rpm. Depress the governor control pedal for the scraper to the maximum governor setting. The pressure on the digital pressure indicator must read a minimum of
1250 kPa (181 psi) . - When the test is complete, turn off the engines. Remove the test equipment.
If the transmission oil pump pressure is too low, the pump has failed.
Caterpillar Information System:
992K Wheel Loader and 854K Wheel Dozer Steering System Pressure Tap Locations
854K Wheel Dozer and 992K Wheel Loader Air Cleaner - Remove and Install
992K Wheel Loader and 854K Wheel Dozer Steering System Hydraulic Oil Contamination - Test
793F CMD Off-Highway Truck Steering Electronic Control System Electronic Control Module (ECM) - Flash Program
D3K2, D4K2 and D5K2 Track-Type Tractors Power Train Idler
Updated Ride Control Accumulator Test and Charge Instructions for Large Wheel Loaders{5077, 5077} Updated Ride Control Accumulator Test and Charge Instructions for Large Wheel Loaders{5077, 5077}
992K Wheel Loader and 854K Wheel Dozer Steering System Steering Control Valve
992K Wheel Loader and 854K Wheel Dozer Steering System Piston Pump (Steering)
C3.4B Engines For Caterpillar Built Machines Fuel Filter Base - Primary Fuel Filter Base
992K Wheel Loader Engine Oil Level - Check
320E and 323E Excavators Machine System Specifications Relief Valve (Negative Flow Control)
950K and 962K Wheel Loaders Power Train Torque Converter Stall - Test
950M, 962M, 950M Z and 962M Z Wheel Loaders Radiator Top Tank - Remove and Install
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Pressure Switch (Parking Brake)
992K Wheel Loader and 854K Wheel Dozer Steering System Steering System Pressure (High Pressure Stall) - Test and Adjust
C32 Auxiliary Engine Cold Weather Starting
994F and 994H Wheel Loaders Automatic Lubrication System Pressure Sensor (Automatic Lubrication)
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Lubrication Oil Pressure - Test
992K Wheel Loader Engine Oil and Filter - Change
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System Electrical Component and Connector Locations
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Planetary - Disassemble - Tractor
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057} Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
854K Wheel Dozer and 992K Wheel Loader Power Train Calibrations (Cat ET)
854K Wheel Dozer and 992K Wheel Loader Power Train Calibrations (Operator Monitor)