992K Wheel Loader Caterpillar


Engine Oil Level - Check

Usage:

992K 880


NOTICE

Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.




Illustration 1g02606177
Right side engine view

The engine oil level gauge (2) is located inside the engine access door on the right side of the machine.

  1. Park the machine on level ground. Move the transmission control switch to the NEUTRAL position and engage the parking brake. Shut off the engine.

  2. Open the engine access door on the right side of the machine.


    Illustration 2g01239233

  3. Check the engine oil level while the engine is stopped. Maintain the engine oil level in the shaded area (A) of the engine oil level gauge.

  4. If necessary, add oil through the filler tube (1).

  5. Close the access door.

Caterpillar Information System:

320E and 323E Excavators Machine System Specifications Relief Valve (Negative Flow Control)
950K and 962K Wheel Loaders Power Train Torque Converter Stall - Test
C13, C15, and C18 Tier 4 Final Engines Turbocharger
(Custom) Log Fork Specifications
Installation of 9SU (S/N: DKX) and 9U (S/N: DKZ) Bulldozer with Single and Dual Tilt Cylinder {5057, 5104, 6050, 6053, 6060, 6078} Installation of 9SU (S/N: DKX) and 9U (S/N: DKZ) Bulldozer with Single and Dual Tilt Cylinder {5057, 5104, 6050, 6053, 6060, 6078}
854K Wheel Dozer and 992K Wheel Loader Hood and Engine Enclosure - Install
992K Wheel Loader and 854K Wheel Dozer Steering System Steering Pilot System
992K Wheel Loader and 854K Wheel Dozer Steering System High Pressure Screen Group (Deluxe Filtration)
950K and 962K Wheel Loaders C7.1 Engine Supplement Refrigerant Compressor - Remove and Install
992K Wheel Loader and 854K Wheel Dozer Steering System Oil Filter (Steering Oil Cooler) (Steering Pilot)
992K Wheel Loader and 854K Wheel Dozer Steering System Gear Pump (Steering Oil Cooler) (Steering Pilot)
854K Wheel Dozer and 992K Wheel Loader Hood and Engine Enclosure - Remove
C3.4B Engines For Caterpillar Built Machines Fuel Filter Base - Primary Fuel Filter Base
992K Wheel Loader and 854K Wheel Dozer Steering System Piston Pump (Steering)
992K Wheel Loader and 854K Wheel Dozer Steering System Steering Control Valve
Updated Ride Control Accumulator Test and Charge Instructions for Large Wheel Loaders{5077, 5077} Updated Ride Control Accumulator Test and Charge Instructions for Large Wheel Loaders{5077, 5077}
D3K2, D4K2 and D5K2 Track-Type Tractors Power Train Idler
793F CMD Off-Highway Truck Steering Electronic Control System Electronic Control Module (ECM) - Flash Program
992K Wheel Loader and 854K Wheel Dozer Steering System Hydraulic Oil Contamination - Test
854K Wheel Dozer and 992K Wheel Loader Air Cleaner - Remove and Install
992K Wheel Loader and 854K Wheel Dozer Steering System Pressure Tap Locations
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Transmission Oil Pump Pressure - Test - Rear Power Train
950M, 962M, 950M Z and 962M Z Wheel Loaders Radiator Top Tank - Remove and Install
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Pressure Switch (Parking Brake)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.