Pump Drive (Rear) to Engine - Connect
Connection Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-9200     | Lever Puller Hoist     | 1     |
B     | 138-7575     | Link Bracket     | 2     |
- Install O-ring seal (9) .
Show/hide table
Illustration 1 | g02586278 |
- Use a suitable lifting device to install pump drive (6) and the attached pumps. The weight of pump drive (6) and the attached pumps is approximately 1610 kg (3550 lb).
Show/hide table
Illustration 2 | g02586239 |
Show/hide table
Illustration 3 | g02586216 |
- Install bolts (8) and bolts (7) . Tighten bolts (8) and bolts (7) to a torque of 135 ± 20 N·m (100 ± 15 lb ft)
- Use a suitable lifting device to install bracket (4) . The weight of bracket (4) is approximately 63 kg (140 lb). Install bolts (5) . Tighten bolts (5) to a torque of 1150 ± 100 N·m (848 ± 74 lb ft). Repeat this step for the opposite side.
Show/hide table
Illustration 4 | g02586183 |
- Install O-ring seal (3) .
Show/hide table
Illustration 5 | g02586316 |
- Use Tooling (A) , Tooling (B) , and a suitable lifting device to install torque converter (1) . The weight of torque converter (1) is approximately 1134 kg (2500 lb).
Show/hide table
Illustration 6 | g02586176 |
- Install bolts (2) .
End By: Install the engine, the rear pump drive, and the torque converter. Refer to Disassembly and Assembly , "Engine, Pump Drive (Rear), and Torque Converter- Install".
Caterpillar Information System:
994H Wheel Loader Engine Supplement Pump Drive (Rear) from Engine - Separate
C3.4B Industrial Engine Fan Clearance - Check
D5R and D6N Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Disassemble
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
D11T Track-Type Tractor Engine Supplement Prelubrication Oil Pump - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Turbocharger - Remove and Install - Tractor
854K Wheel Dozer and 992K Wheel Loader Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System General Troubleshooting Information
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Visual Inspection
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Water Temperature Regulator - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Belt Tensioner - Remove and Install - Tractor
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Machine Preparation for Troubleshooting
C7.1 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Pilot Solenoid Only
D9T Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
C7.1 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Pilot Only System
C7.1 Engines for Caterpillar Built Machines Nozzle Heater Harness - Remove and Install - Heated Nozzle Connection
D6K2 Track-Type Tractor Operator Controls
980K Wheel Loader Cooling System Water Temperature Regulator - Replace
D6K2 Track-Type Tractor Battery Disconnect Switch
D5R and D6N Track-Type Tractor Power Train Transmission Hydraulic Control Valve - Assemble
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM Diagnostic Code List
2011/06/08 D11 Made-To-Order (MTO) Track Group Part Numbers Have Changed {4170}
980K Wheel Loader Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
D6K2 Track-Type Tractor Monitoring System